Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
7 Highlight an option. Press 1or 3 to highlight an option. 8 Select the highlighted item. Press J to select the highlighted item. To exit without making a selection, press the G button. Note the following: • Menu items that are displayed in gray are not currently available. • While pressing 2 generally has the same effect as pressing J, there are some cases in which selection can only be made by pressing J. • To exit the menus and return to shooting mode, press the shutter-release button halfway (039). First Steps Charge the Battery The camera is powered by an EN-EL15 rechargeable Li-ion battery (supplied). To maximize shooting time, charge the battery in the supplied MH-25 battery charger before use. About 2 hours and 35 minutes are required to fully recharge the battery when no charge remains. X 1 Connect the AC power cable or wall adapter. Connect the power cable as shown at right. Use the AC adapter plug in the position shown; do not rotate. Depending on the country or region of purchase, an AC wall adapter may also be supplied with the charger. To use the adapter, insert it into the charger AC inlet (q). Slide the AC wall adapter latch in the direction shown (w) and rotate the adapter 90 ° to fix it in the position shown (e). Reverse these steps to remove the adapter. AC wall adapter latch 90 ° 2 Remove the terminal cover. Remove the terminal cover from the battery. 3 Insert the battery. Place the battery in the battery bay as shown in the illustration on the charger. X 4 Plug the charger in. Battery Charging The CHARGE lamp will blink while the battery charges. 5 Remove the battery when charging is complete. Charging is complete when the CHARGE lamp stops D Charging the Battery Charge the battery indoors at ambient temperatures between 5–35 °C (41–95 °F). The battery will not charge if its temperature is below 0 °C (32 °F) or above 60 °C (140 °F). charging complete blinking. Unplug the charger and remove the battery. D The Battery and Charger Read and follow the warnings and cautions on pages xii–xiii and 289–291 of this manual. Do not use the battery at ambient temperatures below 0 °C/32 °F or above 40 °C/104 °F; failure to observe this precaution could damage the battery or impair its performance. Capacity may be reduced and charging times may increase at battery temperatures from 0 °C/32 °F to 15 °C/59 °F and from 45°C/113°F to 60 °C/140 °F. Do not move the charger or touch the battery during charging. Failure to observe this precaution could in very rare instances result in the charger showing that charging is complete when the battery is only partially charged. Remove and reinsert the battery to begin charging again. If the CHARGE lamp flickers (i.e., flashes about eight times a second) during charging, confirm that the temperature is in the correct range and then unplug the charger and remove and reinsert the battery. If the problem persists, cease use immediately and take battery and charger to your ...