“CTL”, “TC” or “UB” will be shown on the counter display. 3. Engage the Remote mode. To operate this unit locally, press the [REMOTE] button so that the [REMOTE] indicator on the counter display goes out. To operate this unit via the RS-422 or RS-232C serial remote interface, press the [REMOTE] button so that the [REMOTE] indicator lights. Menu switch setting Set the menu switches as required. • Reference sync signal items * Select the reference sync system. No. 003 .....Page 43 Set to “EXT” to synchronize with an external sync signal. • Tracking adjustment selection * Auto tracking/manual tracking selection No. 005 “AUTO TRACKING”.... Page 43 • Video items * Component video output level selection (NTSC only) No. 104 ... Page 44 * Error correction mode selection No. 112 ... Page 45 • Audio items * Audio V. fade function selection Select whether audio noise in transitions should be reduced or not. No. 214 .....Page 50 * Audio output level adjustment mode selection Select automatic or manual adjustment. No. 216 ... Page 51 * Set the output to CH3 and CH4 when playing back a tape with two-channel audio (CH1 and CH2). No. 223 CH3/4 OUT SEL AT 2CH ... Page 52 * Audio output level setting Select the reference output level for the audio output connectors (CH1 to CH4 ) from +4 dB, 0 dB and -6 dB. No. 228 to No. 231
)
