Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
When the inside ring is now turned, the tape speed can be varied from -1x to +1x the normal tape speed. Still playback is established when the inside ring is no longer turned. • A color program may appear in black and white during search or jog playback: this is normal and not indicative of malfunctioning. • The playback pictures may appear distorted during search or jog playback: this is normal and not indicative of malfunctioning. • No sound is heard during search or jog playback. Normal sound is heard at a tape speed of 1/2x or higher. To Finish Playback Press the STOP Button. Still Playback and Slow-Motion Playback The unit is placed in the still picture mode when the search dial is set to its center click-stop position. • When noise appears during still playback, proceed with the slow tracking adjustment. Slow Tracking Adjustment If noise should appear at the top or bottom of the picture during still playback or slow-motion playback (1/25 to 1/2x normal tape speed), press the Tracking “+" or Button to reduce the noise in the slow-motion playback mode. • When still playback continues for more than 5 minutes, the unit will be placed automatically in the stop mode in order to protect the video heads. • No sound is heard during still playback. • During still playback a color program may appear in black or white or the playback image may darken: this is normal and not indicative of malfunctioning. • Depending on how the tape was recorded, noise may appear at the top or bottom of the screen during playback at 1/2x normal tape speed. Field-by-Field Playback Press the FF or REW Button during still playback. When the FF Button is pressed, the tape is fed by one field in the forward direction; when the REW Button is pressed, it is fed by one field in the reverse direction. When the FF or REW Button is kept depressed, the tape is played back in the forward or reverse direction at approximately 1 /25th of the normal speed. Unrecorded Blank Search If a tape with unrecorded blanks lasting 5 or more seconds has been loaded, these blanks will be detected automatically. (1) Load the tape. (2) Press the BLANK SEARCH Button. The tape is searched automatically in the forward direction and is stopped automatically when an unrecorded blank lasting 5 or more seconds is detected. - 15 - Audio Dubbing “Audio dubbing” is a function which is used to record sound onto an already recorded tape. Sound can be recorded onto normal audio track CH1 or CH2 or onto both the CH1 and CH2 channels. (It cannot be recorded onto the Hi-Fi audio tracks.) © Tape recorder (only normal audio signals are recorded) E [FT It is not possible to record MIC input audio and audio input signals at the same time. The microphone takes precedence when connections are made to both to the MIC jack and audio connectors. Microphone (only normal audio CH1 signals are recorded) Preparations • Load the pre-recorded cassette tape. (Check that the accidental erasure prevention tab on the tape is still intact. When it has been broken out, the AUDIO DUB Button will not function even if it is pressed.) • Using AUDIO DUB on the menu screen, select the channels on which the sound is to be added (audio dubbing). Operation (1) Press the PLAY Button to start playback. (2) Press the PAUSE/STILL Button where the sound is to be added (audio dubbing) to place the unit in the pause mode. (3) Press the AUDIO DUB Button. (4) Audio dubbing starts when the PAUSE/STILL Button is pressed to release the unit from the pause mode. (5) To stop the audio dubbing, press the STOP Button. • When audio dubbing is performed, the previously recorded sound will be erased and the new sound will be recorded in its place. • Bear in mind that howling may occur if audio dubbing is performed with the unit placed near a TV set. • Audio dubbing cannot be performed when the tape’s accidental erasure prevention tab has been broken out. - 16 - Remote Controllers VW-RM1 pause remote controller (optional accessory) When the VW-RM1 pause remote controller is connected to this unit, recording can be set to the pause mode from a distance instead of using the button on the unit itself. AG-A600 remote controller (optional accessory) When the AG-IA34 34-pin interface board, available as an optional accessory, is mounted, the unit can be operated by remote control at a distance of about 5 meters instead of the unit’s own operation buttons being operated. • The speed of the playback pictures can be varied up to about 11 times the normal speed in the forward or reverse direction. Mounting the 34-pin interface board First remove the board mounting plate where the interface board is to be mounted, mount the board, connect the connector and screw the mounting board into place. Computer Remote Control Using the optional RS-232C serial interface board (AG-IA823) and RS-232C cable, as shwon in the figure below, a personal computer can be used to operate the unit in ...