Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
To assure continued compliance follow the attached installation instructions and do not make any unauthorized modifications. FCC’s limits are designed to provide reasonable protection against harmful interference when operated in a residential environment. If this device does cause interference to radio or television reception, which can be determined by turning the device off and on, use this device in another location and/or utilize an electrical outlet different from that used by the receiver. If necessary, consult the dealer or an experienced radio/ TV technician for help. If this happens, insert and eject a cassette 5-10 times successively to remove the dirt from the video heads. If a clear picture is not produced, clean the video heads with a commercially available cleaning cassette. If the problem still persists after performing all of the measures listed above, contact a service personnel to request assistance. Heads mainly become dirty because of scratched or dirty tapes, use of the unit in places where temperature and humidity are high, dust in the air and other reasons. Never use tapes on which juice has been spilt or those that are extremely damaged since this will not only cause the heads to become dirty, but will also make the unit malfunction. Contents WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. CAUTION: ■ TO REDUCE THE RISK OF FIRE, SHOCK OR INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. A CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO MOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL A This symbol warns the user that uninsulated voltages within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any inside part of this unit. This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems. Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building; as close to the point of cable entry as possible. ACCESSORIES 1 pc. Infrared Remote Controller 1 pc. Coaxial Cable 1 pc. AC Power Cord 2 pcs. “AA” size Batteries D roil [b Controls and Connection Sockets Infra-red Remote Controller ..... Connections ................................. 8 Tuning the TV to your VCR .....................10 Auto Tuning .................................11 Language Setting of the On Screen Display.......12 Storing TV Broadcasts in your VCR..............13 Setting the Clock of your VCR ..................15 Settings Using the On Screen Display............16 orerärisfitö Playback ....... Manual Recording 19 21 Timer Recording..............................23 • Using the On Screen Display....................23 Search Functions.............................25 •VHS Index Search System .....................25 • Intro-Jet Scan................................25 Editing......................................26 •Assembly Editing.............................26 Other Functions ..............................27 •Other Automatic Functions .....................27 K) Before Requesting Service.....................28 Precautions..................................31 Specifications................................32 3 Controls and Connection Sockets This section describes in detail the function of each button, switch and connection socket. zT z SA" POWER^ EJECT \\ j--7"-—| s—/-1 II f \ X // PCw/Œj i J Wll5'j;Ff ___\ "pp / I -------'//: - V A. *REC 1 rXyfy/ >Q' /-¿LJT—-1 w7 z FRONT O POWER (!)/l Press to switch the VCR from on to standby mode or vice versa. In standby mode, the VCR is still connected to the main AC power. 0 EJECT Ejects a video cassette. 0 Cassette Compartment Insert a video cassette here. Q REW (REWIND) In the stop mode: Rewinds the tape. In the playback mode: Searches back. In the rewind mode: Obtains a hiqh speed picture. "«” is lit. © SEARCH Searches a recorded programme using the intro-jet scan functions. © FF (FAST FORWARD) In the stop mode: Fast forwards the tape. In the playback mode: Searches forward. In the fast forward mode: Obtains a high speed picture. is lit. Q CVC (Crystal View Control) ON: Using the CVC function, the pictures appear more sharply defined during playback. •The CVC indicator is lit on the VCR display. •This control should normally be left in the ON position. OFF: Turn off the CVC function. •The CVC indicator is not lit. © Infra-red Remote Control Receiver Window 0 Display 0 VA Selects the required program position (TV station) of the VCR For tracking ad...