Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
:A » REGLER :► FIN : ACTION 4 Press ACTION to exit this mode. When Using the 100 key When selecting CABLE channels 100 to 125 with the NUMBERED keys, first press the 100 key and then enter the remaining two digits. For example, to select channel 125: Press NUMBERED keys 100, then 2, then 5. To Replace Channels in Memory In case you have cable installed, etc. 1 Press ACTION to display the menu. --------- MENU --------- SET UP CHANNfcL IDIOUAILANGUE:ENGL ISH SELECT : A ▼ KEY SET :► KEY END ; ACT I ON KEY ---- SET UP CHANNEL ---- ETClIÆtSa : CABLE AUTO SET SELECT SET END A * KEY ► KEY ACTION KEY Press AT to select “SET UP CHANNEL," and then press ► to display the “SET UP CHANNEL” screen. Press AT to select “ANTENNA,” and then press ► to set your antenna system (TV or CABLE). Press AT to select “AUTO SET,” and then press ► to display the “CHANNEL AUTO SET” screen. • If you use a cable box, it must be left on for auto channel set. 5 Press CH A to start Channel Auto Set. • To exit this mode, press ACTION twice. To Set or Reset the Clock In case the clock is wrong, or a power failure occurred. 1 Press ACTION to display the menu. 2 Press AT to select “SET CLOCK,” and then press ► to display the SET CLOCK screen. 3 Press AT and to select and set the date, time and DST. (Daylight Saving Time). 4 Press ACTION twice to start the clock and exit this mode. --------- MENU --------- SET UP VCR SET UP CHANNEL 10IOMAI LANGUE: ENGL I SH SELECT:A » KEY SET :► KEY END :ACT ION KEY ------SET CLOCKvb*—V+y TUE 12:00PL' SELECT:A ▼ KEY SET ► KEY ENO : ACT ION KEY To Add or Delete a Channel 1 Select a channel using the NUMBERED keys to add or CH A/ ▼ to delete. 2 Press ADD/DLT to add or delete the channel. • To select a channel once it's deleted, use the NUMBERED keys on the remote control. • This VCR will accurately maintain its calendar up to Dec. 31, 2096,11:59PM. • Normal TV or Cable channels are automatically selected and placed in memory depending on how your VCR is hooked up. 13 Getting Started On^Screer^isgla^^OSD^^^^^^^ ‘Important: If the remote control POWER, ACTION, PROG, CHA/T, INDEX or ADD/DLT button does not work when pressed, press the VCR button on the remote and try the button again. Function & Channel Display When a function button is pressed, e.g. PLAY, or you change channels, a 4 second display appears first in large and then small characters. Warning and Instruction Displays These displays will alert you of a missed operation or 08 NO CH FOUND If no active channels are found PLEASE CHECK ANTENNA for CHANNEL MEMORY... CABLE CONNECTION THEN (See page 12.) PUSH VCR CH UP KEY AGAIN Menu Screen 1 Press ACTION* to display the menu. 2 Press AT and ► to make your selection. MENU 5ET UP VCR SET UP CHANNEL IDIOMA / LANGUE: ENGL ISH SELECT:A * KEY SET :► KEY END ¡ACTION KEY To get the most from each feature, please read the Operating Manual before attempting any operation. VCR Status & Clock Display Press DISPLAY to display or remove the overlay shown below. Current Time Channel If you attempt to set or review a Timer Recording and the Clock is not set... {See page 18.) After a Timer Program has been set... (See page 18.) If you press REC on the remote control or VCR, and a cassette is inserted with no record tab... (See page 16.) If you press PLAY, FF, REW, or REC on the remote control or VCR without a cassette inserted... (See pages 15,16.) PLEASE SET CLOCK BEFORE PROGRAMM INS TURN VCR OFF FOR TIMER RECOROING CHECK CASSETTE RECORD TAB NO CASSETTE PLEASE INSERT A CASSETTE Function Status ” -REC 0:25 12:00AM CH 08 -0:12:34 , SP \ Counter Rec Time Remaining (OTR mode only see page 16.) Tape Speed (See page 5.) If you press POWER or STOP during a Timer Recording... (visible in VCR mode only) (See page 19.) If head cleaning becomes necessary while playing back a tape... (See page 5.) TO CANCEL TIMER REC PUSH POWER THEN STOP KEY VIDEO HEADS MAY NEED CLEANING PLEASE INSERT HEAD CLEANING CASSETTE OR REFER TO MANUAL END:PLAY KEY Blank Tape/ No Video Signal Indication Whenever a blank section of a tape comes up in Play mode, or when the selected channel has no broadcast signal with the Blue Back ON/OFF Feature (page 26) set to ON, the TV screen will turn solid blue. If you press a function button other than STOP/EJECT or POWER while the VCR is in VCR Lock mode... (See page 26.) If you press POWER, ACTION, or PROG on the remote while in TV or CABLE/DSS mode... (See pages 24, 25.) VCR LOCK ACTIVATED NOW TV/CABLE/DSS MOOE PLEASE PUSH VCR KEY ON REMOTE 14 Playback a Tape Check list before you begin. □ All connections are made. (See pages 6-9.) □ TV and VCR are plugged in. □ TV is turned on and set to the VCR channel (CH 3 or 4). 1 Insert a cassette. • VCR power comes on automatically. • “VCR" lights in the Display Panel. 2 Press PLAY on the remote or VCR to start playback. • Playback begins automatically if cassette ha...