Votos - 4, Puntuación media: 4.3
(
)
)
|
Otros manuales para este modelo:
VCR / vídeo - SLV-SE100A2 (1.12 mb)
VCR / vídeo - SLV-SE100A2 (1.06 mb)
Resumen del manual
Do not use the Demonstration Mode for making timer recordings. Doing so may cause the settings to be inaccurate. To activate the Demonstration Mode Press X (pause) on the VCR while turning the DIAL TIMER. “DEMO” appears in the display window for a few seconds. To cancel the Demonstration Mode Turn the power off and unplug the mains lead. Although the Demonstration Mode is cancelled, the timer settings entered while using the Demonstration Mode will remain. Be sure to manually cancel the timer settings before you use the Dial Timer or any other timer method after reconnecting the mains lead (see page 67). Recording TV programmes using the Dial Timer (SLV-SE300D1/D2, SE450D/P, and SE480D only) Recording TV programmes using the ShowView system (not available on SLV-SE100A1/A2) The ShowView system is the feature that simplifies programming the VCR to make timer recordings. Just enter the ShowView number listed in the TV programme guide. The date, times, and programme position of that programme are set automatically. You can preset a total of eight programmes, including settings made with other timer methods. Before you start… • Check that the VCR clock is set to the correct time and date. • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. • To record from a decoder, turn it on. • Turn on your TV and set it to the video channel. • Set TIMER OPTIONS to SHOWVIEW or VARIABLE in the OPTIONS-2 menu (see page 75). 1 2 3 4 5 6 7 8 9 0 ?/1 CLEAR INPUT SELECT Programme number buttons TIMER MENU M/m/Otros modelos de este manual:
VCR / vídeo - SLV-SE250D (1.03 mb)
VCR / vídeo - SLV-SE250P (1.03 mb)
VCR / vídeo - SLV-SE300D2 (1.03 mb)
VCR / vídeo - SLV-SE450D (1.03 mb)