Votos - , Puntuación media: ( )

Manual de usuario Sony, modelo SLV-GA45AV

Fabricar: Sony
Tamaño del archivo: 265 kb
Nombre del archivo: 3063086111.pdf

Idioma del manual:

El documento se está cargando, por favor, espere

Descargar ahoraCerca

El documento se está cargando, por favor, espere

Descargar ahoraCerca

Check your model number by looking at the rear panel of your unit. The SLV-GA55MKII is the model used for illustration purposes. Any difference in operation is clearly indicated in the text, for example, “SLV-GA35MKII only.” Check that you have received the following items with the unit: • Remote commander • R6 (Size AA) batteries • Aerial cable (SLV-GA35MKII, GA55MKII, GA65MKII and GA59 only) • Audio/video cable (2-phono to 2-phono) (SLV-GA45AV only) Step 2 Remote sensor Setting up the remote commander Inserting the batteries Insert two R6 (size AA) batteries by matching the + and – on the batteries to the TV/VIDEO diagram inside the battery compartment. a (TV power) Insert the negative (–) end first, then push ?/1 in and down until the positive (+) end (on/standby) clicks into position. PROG (CH) +/– VOL +/– To Press Turn the TV to standby ?/1(on/standby) or active mode Turn on the TV power a(TV power) Increase (+) or decrease (–) VOL +/– the TV volume Using the remote commander Change the TV PROG (CH) +/– You can use this remote commander to programme position operate the unit and a Sony TV. To operate Select an input source TV/VIDEO this unit, point at the remote sensor on the of the TV either from aerial unit. To operate the TV, point at the remote in or from line in sensor on the TV. Buttons in the shaded area of the remote commander can be used to operate your Sony TV. If the TV does not Notes have the g symbol near the remote sensor, • With normal use, the batteries should last about this remote commander will not operate the three to six months. • If you do not use the remote commander for an TV. extended period of time, remove the batteries to avoid possible damage from battery leakage. • Do not use a new battery with an old one. • Do not use different types of batteries. Step 3 Connecting the unit (For SLV-GA45AV only) Connect the unit to your TV using the audio/video cable (supplied) as shown below to watch video pictures on your TV. This unit AUDIO VIDEO LINE IN LINE OUT IN VIDEO AUDIO TV Audio/video cable (supplied) (For SLV-GA35MKII, GA55MKII, GA65MKII and GA59) Connect the aerial to your unit and TV as shown on the right to watch TV programmes and video pictures on your TV. In addition, if your TV has audio/video (A/V) input jacks, we recommend you connect the unit to your TV using an audio/video cable (not supplied) to get a better picture and sound. Step 4 Tuning your TV to the unit (SLV-GA35MKII, GA55MKII, GA65MKII and GA59 only) If you have connected your unit to the TV using the audio/video cable, skip this step. ?/1 ON/STANDBY H PLAY 1 Press ?/1 ON/STANDBY to turn on the unit. ON/STANDBY 2 Turn on your TV and select a programme position for the video picture. This channel will now be referred to as the video channel. Some TV has the programme position, such as 0, that is reserved for a VCR. In this case, select that programme position for the video picture. Refer to the instruction manual of your TV for details. Connecting the aerial e.g. SLV-GA55MKII to mains AERIAL OUT Aerial cable (supplied) AERIAL IN : Signal flow * A plug adaptor is included with some models. Use the plug adaptor to connect the mains lead to the mains, if necessary. Additional connections To a TV that has audio/video input jacks (For SLV-GA35MKII, GA55MKII, GA65MKII and GA59) This additional connection improves picture and sound quality. Connect the TV as shown below. This unit TV AUDIO VIDEO LINE IN LINE OUT IN VIDEO AUDIO Audio/video cable (not supplied) If you want to use the Trinitron TV Synchro Play function, this connection is necessary. (If your TV has two or more inputs, connect the audio/video cable to the VIDEO IN 1 jacks.) 3 Tune the TV until the video picture below is clearly displayed on the TV screen. SONY VIDEO CASSETTE PLAYER Refer to your TV manual for tuning instructions. You have now tuned your TV to the unit. From now on, whenever you want to play a tape, set the TV to the video channel. To obtain a clear playback picture If the video picture does not appear clearly in step 3 above, turn the RF CHANNEL screw on the rear panel of the unit with a screwdriver to a position where the TV clearly displays the playback picture. To select the TV system For your TV to receive the correct signal from your unit, you must set the TV SYSTEM switch on the rear panel of the unit to either G (for system B/G) or K (for system D/K). If this switch is set to the wrong position, the sound will be distorted. RF CHANNEL TV SYSTEM K G SLV-GA35MKII (E) 3-063-086-11 (1) Operations To set the colour system Press TRINITRON TV SYNCHRO PLAY Playing/searching Turning on the unit and hold the remote commander in place If streaks appear during playback, set for about two seconds. at various speeds COLOR SYSTEM on the unit to conform to and TV to start the system that the tape was recorded in. The unit and TV turn on, and the TV is set (Normally set the switch to AUTO.) playback (Trinitron to the video channel. If there is a t...