Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
When the timer settings overlap The programme that starts first has priority and the second programme starts recording only after the first programme has finished. If the programmes start at the same time, the programme listed first in the menu has priority. about 20 seconds Programme 1 Programme 2 will be cut off Programme 1 Programme 2 about 20 seconds will be cut off Additional Operations Searching using the Smart Search function If you record multiple programmes on a tape, use the Smart Search function to see what has been recorded on your tape. You can see information such as date, time, and channel of programmes recorded on a tape. You can also start playback directly from the selected programme using the SMART SEARCH screen. All programmes are listed on the screen, regardless of how the programme was recorded. The data of the last tape inserted into the VCR is automatically stored in memory. If you want to recall the latest data screen, select LATEST DATA in the SMART SEARCH screen (see page 39). Before you start… • Turn on your TV and set it to the video channel. SMART SEARCH >/./?// OK I/u 1 After recording, press I/uto turn on the VCR. 2 Press SMART SEARCH. 3 Press >/./?//to select the programme you want to start viewing. 4 Press OK. The VCR starts searching, and playback starts automatically from the beginning of the selected programme. 14 : 0 0 1 5 : 00 0 1 4 : 00 15 : 0 0 29 . 9 .9 30MIN. BLANK TIME 3 0 :0 0 1 :0 0 0. 9 2 2 3 SELECT : SMART SEARCH 180MIN. 19 : 0 0 2 0 : 00 328 . 9 5 42 42 02 DATE TIME PROG. OK SET : EXIT : SMART SEARCH SMART SEARCH 180MIN. Additional Operations To stop searching Press p STOP. To exit the SMART SEARCH screen Press SMART SEARCH. To record in a blank space Blank space on the tape will appear as a blank row in the SMART SEARCH screen. Select the blank row in step 3, then press OK. The VCR rewinds/ fast-forwards the tape to the beginning of the blank space, then stops. Start recording. To recall the latest data screen after you remove the tape You can display the data of the last tape used to record a programme, even after you have removed the tape. If you reinsert the tape and record additional programmes, be sure to select LATEST DATA. Otherwise, all of the data for the tape is deleted. 1 Reinsert the last tape that you used to record a programme. 2 Press SMART SEARCH. SET : EXIT : SMART SEARCH SELECT : OK SMART SEARCH NO DATA LATEST DATA 3 Press >/. to highlight LATEST DATA. If you want to reset the latest data screen, highlight NO DATA and press OK, then record a programme. 4 Press OK. The latest data stored in the VCR’s SMART SEARCHEXIT : 14 : 0 0 1 5 : 00 0 1 4 : 00 15 : 0 0 29 . 9 .9 3 0 :0 0 1 :0 0 0. 9 2 2 3 19 : 0 0 2 0 : 00 28 . 9 3 5 SET : SELECT : OK NO DATA LATEST DATA 42 42 20 DATE TIME PROG. memory is displayed. continued Additional Operations Searching using the Smart Search function (continued) Tips • You can store information for up to 24 programmes on a single list. • While recording, you can display the SMART SEARCH screen using the SMART SEARCH button. If you decide to stop recording, press SMART SEARCH to make the SMART SEARCH screen disappear first. Then press p STOP. Notes • If you begin recording a programme “D” from the middle of a previously recorded programme “A” and into another previously recorded programme “B”, the Smart Search information for the second programme “B” which is recorded over is deleted. Originally recorded programmes A BC Recording the programme “D” over the programme “A” and “B” AD C • You cannot use this function unless the clock is set. • Depending on the tape, the total or remaining time may not appear correctly. • When recording a short programme (less than 10 minutes), the Smart Search function may not be available or the programme information may not appear. Also, if you record a long programme directly after a short programme, the Smart Search information for the short programme may be deleted. • Blank space is measured from the end of the last recorded programme to the end of the tape. However, if you eject the tape then make a new recording on the same tape, the original recorded programme(s) is displayed as a blank space. • If no information is stored in the VCR’s memory, LATEST DATA does not appear in the SMART SEARCH screen. Additional Operations Adjusting the picture Adjusting the tracking Although the VCR automatically adjusts the tracking when playing a tape (the indicator flashes in the display window, then goes off), distortion may occur if the tape was recorded in poor condition. In this case, manually adjust the tracking. During playback, press TRACKING +/– to display the tracking meter. The distortion should disappear as you press one of the two buttons (the indicator lights up). To resume automatic tracking adjustments, eject the tape and re-insert it. TRACKING Tracking meter About the Optimum Picture Control (OPC) function The Optimum Picture Control (OPC) function automatically improves recordin...