Votos - 3, Puntuación media: 3.3 ( )

Fabricar: Toshiba Tamaño del archivo: 2.07 mb Nombre del archivo: Idioma del manual:

MENU SETUP To cancel the surround sound mode: To cancel stable sound mode: Follow the above step 2, then press ENTER to select “OFF” Follow the above step 2, then press ENTER to select “OFF” position. Press MENU to return to the TV screen. position. Press MENU to return to the TV screen. 45 Other functions (VCR) Second Audio Program (SAP)/ Stereo recording and playback Your unit is fitted with a SAP broadcast system which enables you to switch to a Second Audio Program when viewing a selected channel. This function applies only when the program is broadcast in multi-languages through the SAP broadcast system. Press MENU. Press or to select “TV SETUP”, 1 then press ENTER. MENU SETUP ENTER M E N U TIMER REC SET TV SETUP CH SETUP AUTO REPEAT ON OFF SYSTEM SETUP . / /ENTER/MENU. 2 2 Press or to select “SAP”. Then press ENTER to select “ON”. Then press MENU repeatedly until the menu screen is cleared. ENTER MENU TV SETUP V-CHIP SET ON/OFF TIMER PICTURE AUDIO SURROUND STABLE SOUND SAP ON OFF ON OFF ON OFF . / /ENTER/MENU. SETUP When the unit is turned on or a channel selection is made, make certain the letters “SAP” appears on the screen. This means that the “Second Audio Program” broadcasting is available. Listening to SAP OR Notes: • When playing back a tape that is not recorded in Hi-Fi stereo mode, the audio will automatically be monaural. • When listening to a VHS Hi-Fi video tape or MTS broadcast through the VHF/UHF jack (Audio/Video cord not connected), the sound will be monaural. STEREO SAP SAP Stereo recording and playbackSecond Audio Program (SAP) AUDIO SELECT 1-2 1-2 1-2 The VHS Hi-Fi audio system permits high fidelity recording of MTS STEREO TV broadcasts. When a MTS STEREO broadcast is received, “STEREO” will appear STEREO on the screen and the program can be viewed or recorded in stereo. The Hi-Fi stereo recording procedure is the same as for normal recordings. Note: When using a CATV system, stereo TV programs may be transmitted over a mono cable channel. In this case “STEREO” will not appear and the sound will be in mono. AUDIO SELECT Output selection When viewing an MTS stereo TV program, or playing a prerecorded VHS Hi-Fi stereo videotape, press AUDIO SELECT to select how the audio will be heard through the speakers. Normally set to the Hi-Fi stereo position, this button can be set to the MONO position if the stereo broadcast or videotape audio is of poor quality. The “R” and “L” positions allow the audio from the Right or Left Hi-Fi channel to be heard over both TV speakers. This button has no effect when viewing a MONO videotape or TV program. Each time when you press the button, OUTPUT SELECTION display appears on the screen for several seconds. Refer to the chart below. OUTPUT SELECTION SOUND HEARD ON BOTH SPEAKERS STEREO L ch R ch MONO STEREO LEFT CHANNEL AUDIO RIGHT CHANNEL AUDIO MONO TV/VCR Duplicating a video tape If you connect the unit to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before 3 turning on the power. 3 2 1 Duplicating a video tape Other functions (VCR)VHF/UHF COAXIAL PHONES L/MONO R REW PLAY FF REC/OTR CHANNEL OPEN/CLOSE VOLUME SKIP STOP PLAY SKIP POWERPOWER REC/OTR TIMER REC STOP/EJECT LINE IN 2 VIDEO AUDIO To AUDIO (R) IN To AUDIO (L) OUT Audio/Video cable (not supplied) Playback VCR To VIDEO OUT To AUDIO (R) OUT Recording VCR For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer’s instructions. A typical camcorder dubbing hookup is shown above. Audio/Video cable (not supplied) To AUDIO (R) IN To AUDIO (L) IN To VIDEO IN Recording VCR To AV Jack Playback Camcorder Connection with Camcorder • Select “LINE2” on step 2. To VIDEO IN To AUDIO (L) IN Connection with second video recorder • Select “LINE1” on step 2. Illustration of MW20FN1/R Press SP/SLP to select the desired tape speed SP or SLP. It is recommended that you set the Speed to the SP mode on the recording VCR for best results. 1 Press INPUT SELECT once or twice to select AUDIO/VIDEO input position. “LINE1” or “LINE2” will appear on the screen. 2 Press PLAY on the playback VCR, then press PAUSE/STILL. 3 Press both REC at the same time, then press PAUSE/STILL. 4 Release the recording pause and the playback.5 LINE1: on the rear panel LINE2: on the front panel Preparation: • Press TV/VCR to select the TV/VCR mode. • Load a cassette tape with the erase prevention tab intact. • Load a previously recorded tape into the playback VCR or Camcorder. LINE1 SP/SLP RETURN INPUT SELECT ZOOM PAUSE/STILL REC Note: Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may infringe the rights of copyright owners and be contrary to copyright laws. TV/VCR 2 Recording a DVD/CD disc You can record disc material in DVD, Audio CD, etc. onto a video tape with this unit. 4 3 5 1 Duplicating a DVD or CD disc DVD PLAY REC STOP SP/SLP RETURN Press SP/SLP to select the desired tape speed SP or SLP. Preparation...

Descargar ahora

Introduzca dos números de la imagen: