Votos - 2, Puntuación media: 4.5 ( )

Fabricar: Toshiba Tamaño del archivo: 3.82 mb Nombre del archivo: Idioma del manual:

VHF/UHF COAXIAL Notes: Amplifier equipped with a Digital audio input To COAXIAL type digital audio input 75 . coaxial cable (not supplied) To COAXIAL DIGITAL AUDIO OUT • DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the unit to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO OUT jack of the unit. • Connect the COAXIAL DIGITAL AUDIO OUT jack of the unit to the “COAXIAL” input of a Receiver or Processor. • Refer to the owner’s manual of the connected equipment as well. • When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. • The output sound of the unit has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. •Turn off the amplifier before you connect or disconnect the unit’s power cord. If you leave the amplifier power on, the speakers may be damaged. 17 5W50101A [E]p13-17 17 2/22/06, 6:41 PM Basic setup Starting setup The STARTING SETUP function makes installing your unit easily. It leads you the Language selection, TV/CABLE selection and auto channel memory automatically. IMPORTANT: Make sure that the antenna or cable TV system connection is made! POWER / ENTERBasic setup Starting setup The STARTING SETUP function makes installing your unit easily. It leads you the Language selection, TV/CABLE selection and auto channel memory automatically. IMPORTANT: Make sure that the antenna or cable TV system connection is made! POWER / ENTER Starting setup Press POWER. The starting setup function begins and the Language setup menu appears on the screen. Press or to select your desired language, then press ENTER. Press or to select “TV” or “CABLE”, then press ENTER. Press or to select “START”, then press ENTER. If you select “CANCEL” and press ENTER, the STARTING SETUP stops and changes to the TV screen. 1 2 3 LANGUAGE/IDIOMA/LANGUE ENGLISH ESPANOL FRANCAIS CHANNEL PLAN TV CABLE AUTO SETUP START CANCEL Now the “AUTO CH MEMORY” and “AUTO CLOCK”starts. After the starting setup is completed, the TV channel appears on the screen. 4 AUTO CH MEMORY STOP : CANCEL Notes: • The starting setup function will work only when you press POWER for the first time. • In “AUTO CLOCK” setting, it may take more than 10 minutes to read the EDS signal for one channel, which has only “Time of day” or “Local time zone”. 18 5W50101A [E]p18-21 18 2/22/06, 6:41 PM TV/VCR POWER Clock setting DISPLAY The auto clock function will automatically set the built-in clock (Month, Day, Year and Time) when the unit is connected to an antenna or cable system and it is turned off. As the u...

Descargar ahora

Introduzca dos números de la imagen: