Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
5 Tune the TV until the video playback picture is clearly displayed on the TV screen. Refer to your TV manual for tuning instructions. You have now tuned your TV to the unit. From now on, whenever you want to play a tape, set the TV to the video channel. If the playback picture does not appear clearly, see “To obtain a clear playback picture” on page 9. 8ENE Getting Started SLV-KF295ME/PS/KA195ME/PS 3-858-164-11 (1) To obtain a clear playback picture If the playback picture does not appear clearly in step 5 above, turn the RF CHANNEL screw on the rear panel of the unit with a RF CHANNEL screwdriver to a position where the TV clearly displays the playback picture. Selecting the TV system For your TV to receive the correct signal from your unit, you must set the TV SYSTEM switch on the rear panel of the unit to either G (for system B/G) or K (for system D/K). If this switch is set to the wrong position, the sound will be distorted. TV SYSTEM K G 9EN Getting Started SLV-KF295ME/PS/KA195ME/PS 3-858-164-11 (1) Getting Started Basic Operations Playing a tape NTSC PB PICTURE COLOR SYSTEM 6EJECT P PAUSE 3/# SEARCH )FF a PLAY pSTOP 0REW 1 Turn on your TV and set it to the video channel. 2 Insert a tape. The unit turns on, and starts playing automatically if you insert a tape with its safety tab removed. 10ENE Basic Operations SLV-KF295ME/PS/KA195ME/PS 3-858-164-11 (1) 3 PLAY PLAY Press aPLAY. When the tape reaches the end, it will rewind automatically. Additional tasks To Press Stop play p STOP Pause play P PAUSE Resume play after pause P PAUSE or a PLAY Search forward )FF or #SEARCH during playback Search backward 0REW or 3SEARCH during playback Fast-forward the tape )FF during stop Rewind the tape 0REW during stop Eject the tape 6EJECT To set the colour system If streaks appear during playback, set COLOR SYSTEM on the unit to conform to the system that the tape was recorded in. (Normally set the switch to AUTO.) Basic Operations If your tape was recorded in Set COLOR SYSTEM to PAL PAL/MESECAM NTSC NTSC MESECAM PAL/MESECAM continued 11EN Basic Operations SLV-KF295ME/PS/KA195ME/PS 3-858-164-11 (1) Playing a tape (continued) To play an NTSC-recorded tape Set NTSC PB on the unit according to the colour system of your TV. If your TV is Set NTSC PB to PAL ON PAL TV NTSC 4.43 NTSC 4.43 NTSC 3.58 NTSC 3.58 Watching a rental tape Set PICTURE on the unit to RENTAL PICTURE. Noise will be reduced on the playback picture. After watching the rental tape, set the switch back to NORMAL. Selecting the sound during playback (SLV-KF295 only) Press AUDIO MONITOR to select the desired sound. Each press of the button changes the display on the AUDIO MONITOR unit. When you play a tape recorded in stereo or with a bilingual sound track, the HiFi indicator on the unit lights up. To listen to a Press AUDIO MONITOR until the Stereo tape’s Bilingual tape’s display window indicator shows Stereo sound Main and sub sounds “L/R” Left channel Main sound “L” Right channel Sub sound “R” Standard sound* Standard sound* No indication * The mixed sound of left and right channels (monaural) 12ENE Basic Operations SLV-KF295ME/PS/KA195ME/PS 3-858-164-11 (1) How sound is recorded on a video tape (SLV-KF295 only) The unit records sound onto two separate tracks. Hi-fi audio is recorded onto the main track along with the picture. Monaural sound is recorded onto the normal audio track along the edge of the tape. Stereo Bilingual Mixed left/right Mixed left/right channels channels Hi-fi audio track (main track) Stereo sound Normal audio track (monaural) Main (left channel) (left/right Sub (right channel) channels) Notes • Depending on your TV, the following may occur while playing an NTSC-recorded tape: – the picture is black and white, – the picture shakes, – no picture appears on the TV screen, – black streaks appear horizontally on the TV screen, and – the colour density increases or decreases. • To listen to playback sounds in stereo, you must use the AUDIO OUT connections (SLV-KF295 only). • When you play a tape recorded in monaural, the sound is heard in monaural regardless of the AUDIO MONITOR setting. • You cannot select the sound to listen to while recording. • You can playback tapes recorded in the SP mode only. • You can eject a tape even when the power is off. When you press 6 EJECT, the unit turns on automatically. After ejecting the tape, the unit turns off again. • When the pause mode lasts for more than approximately five minutes, the unit will automatically enter the playback mode. Basic Operations 13EN Basic Operations SLV-KF295ME/PS/KA195ME/PS 3-858-164-11 (1) Additional Operations Playing/searching at various speeds 0 REW aPLAY ) FF 0 REW aPLAY )FF 7FRAME 3/# SEARCH &SLOW +/– Playback options Operation Fast-forward/rewind During stop, press )FF or 0 REW. View the picture during fast-During fast-forward, hold )FF down. During rewind, hold forward or rewind 0REW down. Play at high speed During playback or pause, press #SEARCH or 3SEARCH. Play...
Otros modelos de este manual:VCR / vídeo - SLV-KF295ME (485.38 kb)