Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. The mains lead must only be changed at a qualified service shop. Precautions Safety • This unit operates on 110 – 240 V AC, 50/ 60 Hz. Check that the unit’s operating voltage is identical with your local power supply. • If anything falls into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further. • The unit is not disconnected from the mains as long as it is connected to the mains, even if the unit itself has been turned off. • Unplug the unit from the mains if you do not intend to use it for an extended period of time. To disconnect the lead, pull it out by the plug, never by the lead. Installing • Do not install this equipment in a confined space such as a book or similar unit. • Allow adequate air circulation to prevent internal heat buildup. • Do not place the unit on surfaces (rugs, blankets, etc.) or near materials (curtains, draperies) that may block the ventilation slots. • Do not install the unit near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration or shock. • Do not install the unit in an inclined position. It is designed to be operated in a horizontal position only. • Keep the unit and cassettes away from equipment with strong magnets, such as microwave ovens or large loudspeakers. • Do not place heavy objects on the unit. • If the unit is brought directly from a cold to a warm location, moisture may condense inside the VCR and cause damage to the video head and tape. When you first install the unit, or when you move it from a cold to a warm location, wait for about four hours before operating the unit. Caution Television programmes, films, video tapes and other materials may be copyrighted. Unauthorized recording of such material may be contrary to the provisions of the copyright laws. Also, use of this recorder with cable television transmission may require authorization from the cable television transmitter and/or programme owner. Compatible colour/TV systems • This VCR is designed to record and play back using the PAL (B/G, D/K and I), MESECAM (B/G and D/K) and NTSC colour systems. Recording of video sources based on other colour systems cannot be guaranteed. • NTSC colour signals can only be recorded through the line input. WARNING Table of Contents Getting Started 4 Index to parts and controls 10 Step 1 : Unpacking 11 Step 2 : Setting up the remote commander 13 Step 3 : Connecting the VCR 15 Step 4 : Setting up the VCR with the Auto Set Up function 18 Step 5 : Setting the clock 20 Step 6 : Selecting the TV system 21 Selecting a language 22 Presetting channels 25 Changing/disabling programme positions Basic Operations 30 Playing a tape 32 Recording TV programmes 36 Recording TV programmes using the Easy Timer (SLV-ED949ME/ SG only) 42 Recording TV programmes using the timer Additional Operations 45 Playing/searching at various speeds 47 Setting the recording duration time 48 Checking/changing/cancelling timer settings 50 Recording stereo and bilingual programmes (SLV-ED949ME/SG only) 53 Searching using the index function 54 Adjusting the picture 55 Reducing the VCR’s power consumption 56 Changing menu options Editing 58 Connecting to a VCR or stereo system 60 Basic editing Additional Information 61 Troubleshooting 65 Specifications 66 Index Getting Started Table of contents Getting Started Index to parts and controls Refer to the pages indicated in parentheses ( ) for details. Front panel For SLV-ED949ME/SG 1 ?/1 ON/STANDBY switch 2 Remote sensor (11) 3 Tape compartment 4 A EJECT button (30) 5 H PLAY button* (30) (45)/M FF (fast-forward)/m REW (rewind) (30) (45)/Playback Dial (31) (45) 6 x STOP button (17) (30) (60) 7 X PAUSE button (30) (41) (60) 8 z REC (record) button (33) (47) (60) 9 EASY TIMER (36) q; PROGRAM/TRACKING +/– buttons* (37) (54) qa LINE-2 IN VIDEO/AUDIO L/R (left/right) jacks (58) * The H PLAY and PROGRAM/ TRACKING + buttons have a tactile dot. Getting Started For SLV-ED343ME/SG Getting Started 1 ?/1 ON/STANDBY switch 2 A EJECT button (30) 3 Remote sensor (11) 4 Tape compartment 5 H PLAY button* (30) (45)/M FF (fast-forward)/m REW (rewind) (30) (45)/Playback Dial (31) (45) 6 x STOP button (17) (30) (60) 7 X PAUSE button (30) (41) (60) 8 z REC (record) button (33) (47) (60) 9 PROGRAM/TRACKING +/– buttons* (37) (54) * The H PLAY and PROGRAM/ TRACKING + button has a tactile dot. continued Getting Started Index to parts and controls (continued) Display window 3145267890qa 1 Tape indicator 2 START indicator (37) 3 STOP indicator (37) 4 MONTH indicator (40) 5 YEAR indicator (40) 6 NICAM indicator* (51) 7 STEREO indicator* (50) 8 Timer indicator (39) (43) 9 Recording indicator (33) 0 Time counter/clock/line/programme position indicator (31) (32) (59) qa Tap...
Otros modelos de este manual:VCR / vídeo - SLV-ED343ME (714.85 kb)
VCR / vídeo - SLV-ED949ME (714.83 kb)
VCR / vídeo - SLV-ED949SG (714.83 kb)