Votos - 2, Puntuación media: 4 ( )

Fabricar: Sony Tamaño del archivo: 275.31 kb Nombre del archivo: Idioma del manual:

If you do so, the TV's input source will momentarily switch to the TV's tuner. 12 Basic Operations Additional Operations Playing/searching Playback options Operation Fast-forward/rewind During stop, press ) FF or 0 REW. View the picture during fast- During fast-forward, hold ) FF down. During rewind, hold forward or rewind 0 REW down. Play at high speed During playback or pause, press # SEARCH or 3 SEARCH. Play in slow motion During playback or pause, press SLOW +/-. Press the +/-buttons to change the speed. Play frame by frame During pause, press 7 FRAME to advance the picture one frame. Hold the button down to play one frame each second. Rewind and start play During stop, hold 03 REW on the unit down and press £ PLAY on the unit. continued Additional Operations 13 Playing/searching at various speeds (continued) To resume normal playback Press £ PLAY. Tip • If the picture shakes while in the still mode, adjust the picture using $/4 TRACKING NORMAL/SLOW STILL ADJUST. Notes • Streaks or snow cannot be eliminated completely in the various playback operations, especially in the slow motion mode. • The sound is muted during these operations. • If you press 7 FRAME during playback, playback continues at the normal speed but the sound is muted. Press £ PLAY to resume normal playback. 14 Additional Operations Adjusting the picture Adjusting the tracking Although the unit automatically adjusts the tracking when playing a tape, distortion may occur if the tape was recorded in poor condition. If so, manually adjust the tracking. Press $/4 TRACKING NORMAL/SLOW to obtain the best possible picture. The distortion should disappear as you press one of the two buttons. If you cannot get a clear picture with manual adjustment, press TRACKING AUTO/MANU to return to automatic adjustment. About OPC OPC (Optimum Picture Control) automatically improves playback quality by adjusting the unit to the condition of the video heads and tape. The OPC function automatically works on all types of tapes, including rental tapes and tapes that were not recorded with OPC. Notes • The auto tracking function works automatically when you play back a tape just after inserting it. • Sufficient picture quality may not be obtained when playing back tapes recorded on another VCR or tapes in poor condition. • When a tape recorded with the copyguard system is played back, intermittent distortion may appear in the upper portion of the picture. However, this is not a malfunction of the unit. ©<=>Q o Qj CD © CDIŒ) CO TRACKING AUTO/ MANU $ /4 TRACKING NORMAL/ SLOW Additional Operations 15 Editing with another VCR How to connect to record on this unit (SLV-XA37PS/ XA137PS only) This unit (Recorder) LINE IN \ J u H 0 H 0 ft ran TV Other VCR (Player) :o LINE OUT ft Audio/video cable (not supplied) : Signal flow Tip • Use a commercially available 2-phono to 2-phono type audio/video cable. If the other VCR has the AUDIO L and R jacks, use a commercially available 3-phono to 2-phono type audio/video cable. Notes • Make sure you connect the plugs to the jacks of the same colour. • When connecting the units, do not simultaneously connect the LINE IN and LINE OUT jacks on your unit with the other VCR. A humming noise may occur if you do this. 16 Additional Operations Operation (when p pause recording on this unit) (SLV-XA37PS/XA137PS only) You can make a copy of a tape using this unit for recording or playback. The unit cannot record TV programmes directly since it does not have a TV tuner. Before you start editing • Turn on your TV and set it to the video channel. 1 Insert a source tape with its safety tab removed into the other (playback) VCR. Search for the point to start playback and set it to playback pause. 2 Insert a tape with its safety tab in place into this (recording) unit. Search for the point to start recording and press p PAUSE. 3 Press r REC on this unit to set it to recording pause. 4 To start editing, press the P PAUSE buttons on both units at the same time. To stop editing Press the p STOP buttons on both units. To save a recording To prevent accidental erasure, break off the safety tab as illustrated. To record on a tape again, cover the tab hole with adhesive tape. Safety tab Tips • To edit more precisely, press the P PAUSE buttons on the units to release pause. • To cut out unwanted scenes while editing, press P PAUSE on this unit when an unwanted scene begins. When that scene ends, press P PAUSE again to resume recording. Note • You can record tapes only in SP mode. Additional Operations 17 Additional Information Troubleshooting If you have any questions or problems not covered below, please consult your nearest Sony service facility. Symptom Remedy The ON/STANDBY switch does not function. • Connect the mains lead securely. The power is turned on but the unit does not operate. • Moisture condensation occurs. Turn the power off, unplug ...

Descargar ahora

Introduzca dos números de la imagen: