Iniciar sesión:
Votos - , Puntuación media: ( )

Manual de usuario American Dynamics, modelo VideoEdge ADNSNVR-CL1

Fabricar: American Dynamics
Tamaño del archivo: 278.04 kb
Nombre del archivo: 30f941dd-7952-49dc-938b-5fead93483ab.pdf

Idioma del manual:en

El documento se está cargando, por favor, espere
El documento se está cargando, por favor, espere

Resumen del manual


1.01 SUMMARY A. The Network Video Recorder shall be turn-key, software-based open platform solution that functions as an appliance server and operates on hardened and embedded Linux® operating system. It shall be available as software-only or as a bundled server solution. 1.02 REFERENCES A. Bureau of Standards, Metrology and Inspection (BSMI) B. Canadian Standards Association (CSA) C. China Compulsory Certificate (CCC) D. Conformity for Europe (CE) E. EMC and Radio Communications Compliance (C-Tick) F. Federal Communications Commission (FCC) G. HyperText Transfer Protocol (HTTP) H. Interference-Causing Equipment Standards (ICES) I. International Electrotechnical Commission (IEC) J. Ministry of Information & Communications (MIC) K. South African Bureau of Standards (SABS) L. Transmission Control Protocol/Internet Protocol (TCP/IP) M. Underwriters Laboratories Inc. (UL) N. Voluntary Control Council for Interference (VCCI) 1.03 DEFINITIONS A. No Substitutes: The exact make and model number identified in this specification shall be provided without exception. B. Or Equal: Any item may be substituted for the specified item provided that in every technical sense, the substituted item provides the same or better capability and functionality. C. Or Approved Equal: A substitute for the specified item may be offered for approval by the Owner. The proposed substitution must, in every technical sense, provide the same or better capability and functionality as the specified item. Such requests for approval shall be submitted in accordance with the provisions of 8200-2608-01 B0 VideoEdge® Network Video Recorder 1 of 20 Architect & Engineer Specification AMERICAN DYNAMICS VIDEOEDGETM NETWORK VIDEO RECORDER PART 1.05 – SUBMITTALS, and must be obtained within the time frames outlined. 1.04 SYSTEM DESCRIPTION A. The Network Video Recorder shall be turn-key, software-based open platform solution that functions as an appliance server and operates on hardened and embedded Linux® operating system. It shall be available as software-only or as a bundled server solution. The unit shall combine multiplexing, sensor/motion detection, video, and audio. The unit must operate in server-client architecture as a network appliance and simultaneously support viewing, recording, and playback of video. The Network Video Recorder shall be TCP/IP and HTTP compliant, enabling administrators to provide better corporate deployment, and provide a standard format for server management. 1.05 SUBMITTALS A. General: Submittals shall be made in accordance with the Conditions of the Contract and Submittal Procedures Section. B. Shop Drawings and Schematics: Shall depict the Network Video Recorder in final proposed “as built” configuration. The following must be provided: 1. Connection diagrams for interfacing equipment. 2. List of connected equipment. 3. Locations for all major equipment components to be installed under this specification. C. Product Data: The following shall be provided: 1. Technical data sheets. 2. A complete set of instruction manuals. D. Quality Assurance Submittals: The following shall be submitted: 1. Checkout Report: The Contractor shall provide the Owner with a checkout report for each Network Video Recorder. The report shall include: a. A complete list of every device. b. The date it was tested, and by whom. c. If retested, the date it was retested, and by whom. d. The final test report shall indicate that every device was tested successfully. 2. Manufacturer’s Instructions: The Contractor shall deliver TBD sets of System Operation and Maintenance Manuals (if available) to the Owner. 8200-2608-01 B0 VideoEdge® Network Video Recorder 2 of 20 Architect & Engineer Specification AMERICAN DYNAMICS VIDEOEDGETM NETWORK VIDEO RECORDER 3. Notice of Completion: When the final acceptance has been satisfactorily completed, the Owner shall issue a notice of completion to the Contractor. 1.06 QUALITY ASSURANCE A. Manufacturer’s Qualifications: The Network Video Recorder shall be developed and manufactured by a reputable Fortune 100 company with more than 20 years of manufacturing experience in the security industry. B. The Network Video Recorder manufacturer shall include on their public website a minimum of the following tools, directly related to the support of the Network Video Recorder system: 1. Application Solutions 2. Digital Demo Network 3. Software Downloads 4. Support Documents 5. Software Registration 6. Training Information and Registration C. Contractor Qualifications: The Contractor shall be a factory authorized and certified installer of the security equipment supplied in this project and shall have been regularly engaged in the installation of the type of security equipment, hardware, and software specified herein for a period of not less than TBD years. The contractor shall be factory trained on the Network Video Recorder and products they propose and shall submit with their proposal a certificate from the manufacturer indica...

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría