Votos - 3, Puntuación media: 3.7 ( )

Fabricar: JVC Tamaño del archivo: 6.12 mb Nombre del archivo: Idioma del manual:

B Press rt to select the appropriate setting, then press OK. * The default setting is bold in the table below. 8 F-1 INPUT VIDEO: When connecting an appliance to the VIDEO input connector, set to “VIDEO”. S-VIDEO: When connecting an appliance to the S-VIDEO input connector, set to “S-VIDEO”. B B Return to the normal screen. Press MENU. 70 70 N EDITING (cont.) Edit To Or From Another Video Recorder ? Advantages of S-VHS video recorders You can edit from VHS to S-VHS, S-VHS to VHS, or, from S-VHS to S-VHS. . From VHS to S-VHS: Record VHS playback signals in the S-VHS mode. Although the picture quality is inherently limited by that of the original, the edited tape has better picture quality than those made by VHS-to-VHS editing. . From S-VHS to VHS: Because the picture quality of the source material is very high, the edited tape has better picture quality than those made by VHS-to-VHS editing. . From S-VHS to S-VHS: All signals will be transferred with minimum degradation. You can use your recorder as the source player or as the recording deck. A A Make connections. Connect the player’s 21-pin SCART connector to the recorder’s 21-pin SCART connector as illustrated on page 71. A When using your recorder as the source player ... ... connect its L-1 IN/OUT connector to the recording deck. B When using your recorder as the recording deck ... ... connect its L-1 IN/OUT or L-2 IN/DECODER connector to the source player. C If another recorder is compatible with the Y/C signal ... ... connect your recorder’s L-1 IN/OUT connector to another recorder. With C connection ... . When using your recorder as the recording deck, set “L-1 INPUT” to “S-VIDEO” and “L-2 SELECT” to “A/V” (. pg. 68, 69). . When using your recorder as the source player, set “L-1 OUTPUT” to “S-VIDEO” (. pg. 68). B B Select the recording deck. Slide TV/CABLE/SAT to the right, then press HDD or SVHS. C C Set the input mode of recording deck. With this video recorder, press AUX (number key “0”) and/or VCR PR to select “L-1” for the L-1 IN/OUT connector, or “L-2” for the L-2 IN/DECODER connector, depending on the connector being used. . When using another recorder as the recording deck, refer to its instruction manual. . When using the L-2 IN/DECODER connector, set “L-2 SELECT” to “A/V” (. pg. 69). D D Set the edit mode. See “PICTURE CONTROL” on page 83. E E Start the source player. Engage the Play mode of the source player. F F Start the recording deck. Engage the Record mode of the recording deck. EN 71 A B TV receiver Player Your recorder Recorder Your recorder TV receiver TV receiver Recorder Your recorder Player AV mode 21-pin SCART cable (not provided) Recorder Another recorder AV mode 21-pin SCART cable (not provided) Another recorder Player Another recorder S-Video cable (provided) 21-pin SCART cable (not provided) NOTES: . All necessary cables can be obtained from your dealer. . For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal. . When you select “EDIT” to dub tapes in step D, be sure to select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you finish dubbing the tapes. . When you use this recorder as the source player for editing, be sure to set “O.S.D.” to “OFF” before starting (. pg. 84). . If you are using another recorder with S-Video and Audio input/output connectors, you can connect those connectors to this recorder’s S-VIDEO and AUDIO input/output connectors. When using your recorder as the source player ... ... connect its rear panel S OUT and AUDIO OUT connectors to the recording deck’s S-Video and Audio input connectors. When using your recorder as the recording deck ... ... connect its front panel S-VIDEO and AUDIO input connectors to the source player’s S-Video and Audio output connectors. Then, set the recorder’s input mode to “F-1”, and set “F-1 INPUT” to “S-VIDEO” (. pg. 69). 72 72 N EDITING (cont.) DV Dubbing You can dub programmes from a camcorder or DV equipment connected to the recorder with a DV cable. The recorder’s remote control allows you the limited control of the connected camcorder or DV equipment functions during dubbing. NOTE: When you use a PC connecting to the DV IN/OUT connector, we do not assure the normal operation of this recorder. Your recorder DV IN/OUT connector ? Camcorder DV cable (not provided) DV connector DV equipment EN 73 A Make connections. F End dubbing. Connect the camcorder to the DV IN/OUT connector on Press weto move the arrow to , then press the recorder’s front panel. OK. B B Select the HDD deck. Slide TV/CABLE/SAT to the right, then press HDD. C C Prepare the HDD deck for dubbing. Press VCR PR+/– to set the channel to “D-1”. . The on-screen display for DV dubbing appears. . Recording speed is automatically set to DV and “DV” appears under the HDD capacity graph. D D Prepare the DV equipment for dubbing. A Press we to move the arrow to , then press OK to display the remote icon (facing to the right) for the DV equipment. B Search f...

Descargar ahora

Introduzca dos números de la imagen: