Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
Ask a qualified service person for servicing. 2. Handle the camera with care. Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handling or storage. 3. Do not expose the camera to rain or moisture, or try to operate it in wet areas. Turn the power off immediately and ask a qualified service person for sen/icing. Moisture can damage the camera and also create the danger of electric shock. 4. Do not use strong or abrasive detergents when cleaning the camera body. Use a dry cloth to clean the camera when dirty. In case the dirt is hard to remove, use a mild detergent and wipe gently. 5. Clean the CCD faceplate with care. Do not clean the CCD with strong or abrasive detergents. Use lens tissue or a cotton tipped applicator and ethanol. 6. Never face the camera towards the sun. Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at the sun or other extremely bright objects. Otherwise, blooming or smear may be caused. 7. Do not operate the camera beyond the specified temperature, humidity or power source ratings. Use the camera under conditions where temperature is between -10°C - +50°C (14°F - 122°F), and humidity is below 90 %. The input power source is 120 V AC 60 Hz for WV-BLR730 and DC 12 V/AC 24 V for WV-BLR734. Caution: To prevent fire or electric shock hazard, a UL listed wire (VW-1, style 1007) should be used for DC 12 V or AC 24 V Input Terminals. MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS! -4- Auto Iris Lens Connector This connector-is used to connect with the auto iris lens by a 4-pin male connector that is supplied as a standard accessory (Part No. YFE4191J100). Flange-back Adjusting Ring This ring is used to adjust the back focal length or picture focus. Rotate this ring clockwise for a C-mount lens or counterclockwise for a CS-mount lens. Lens (Option) Camera Mounting Screw Hole This hole is used to mount the camera onto a mounting bracket. Down Button (C©>) This button is used to move the cursor downward. It is also used to select items in the CAM SET UP menu. Right Button ( [3 ) This button is used to move the cursor to the right. It is also selects the mode and can be used to adjust some levels. ® Left Button ( €]) This button is used to move the cursor to the left. It also selects the mode and can be used to adjust some levels. © Up Button (c£)) This button is used to move the cursor upward. It is also used to select items in the CAM SET UP menu. (D Set Button (El) This button is used to activate an item selected in the CAM SET UP menu. © Gen-lock Termination Switch (Hi-Z, G/L 75 ft) Set this switch to Hi-Z when a gen-lock video input signal is looped through. In all other cases, set this switch to 75 ft. (Q) Power indicator This indicator lights up when the power of this camera is on. @ Gen-lock Input Connector (GEN-LOCK) This connector is used to connect an external system for synchronization. © Video Output Connector (VIDEO OUT) This connector is used to connect with the VIDEO IN connector of the monitor. (Qt Power Cord Socket This socket is used to connect the power cord (supplied as a standard accessory). ig RS485 Terminals (RS485 A/B/GND) These terminals are used for RS485 site communication. Connect RS485 cables to these terminals. (0>> AC/DC Compatible Input Terminal (DC 12V IN/AC 24V IN) This terminal is for connecting the 12 V DC or 24 V AC power supply cord. Cautions: 1. Connect to 12 V DC (10.5 V-16 V) or 24 V AC (19.5 V-28 V) class 2 power supply only. Make sure to connect the grounding lead to the GND terminal when the power is supplied from a 24 V AC power source. 2. To prevent fire or electric shock hazard, use a UL listed wire VW-1, style 1007 cable for the Input Terminal. CONNECTIONS A. WV-BLR730 (120 V AC 60 Hz) 1. Connect the AC power cord (supplied as standard accessory) to the power cord socket of the camera. 2. Connect the AC power cord to an electrical outlet of 120 VAC 60 Hz. Notes: • Connect the power cord firmly, • The power cord should be long enough for panning and tilting. If the cable is too short, the power cord plug may pulled off the camera when the camera pans or tilts. B. WV-BLR734 (12 V DC/24 V AC) The WV-BLR734 has an AC/DC compatible input terminal. The 12 V DC or 24 V AC power supply cord can be connected to this terminal. The camera detects the power source automatically. 1. 12 V DC Power Supply Connect the power cord to the AC/DC compatible input terminal on the rear panel of the camera. DC 1« «2« 1» I* 3^3 12 V DC {10.5 V-16 V) Resistance of copper wire [at 20°C (68°F)] Copper wire size (AWG) #24 (0.22mmJ) #22 (0.33mm1) #20 (0.52mmJ) #18 (0.83mm») Resistance Q/m 0.078 0.050 0.030 0.018 Resistance Q/ft 0,026 0.017 0.010 0.006 • Calculation method of maximum cable length between camera and power supply. 10.5 V DC < Va - (R x 0.42 x L) < 16 V DC L : Cable length (meter) R : Resistance of copper wi...