Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
The selected character appears in the editing area. (The pointer in the editing area moves to the right automatically at this moment.) 5. Repeat the steps above until all characters are edited. To enter a blank space in the CAMERA ID Move the cursor to SPACE and press E]. To edit a specific character in the CAMERA ID 1. Move the cursor to the editing area by pressing . 3- 2. Move the pointer to the character to be edited by pressing <3 or . Then move the cursor to the character area and select a new character. 3. Press CU to determine the CAMERA ID. To erase all characters in the editing area Move the cursor to RESET and press E] - All characters in the editing area disappear. To determine the display position of the CAMERA ID 1. Move the cursor to POSI, and press E3 The display shown below appears and the CAMERA ID starts blinking. Blinking 2. Move the CAMERA ID to the desired position by pressing €1/ /(^/Qp . 3. Press ED to fix the position of the CAMERA ID. The mode returns to the previous CAMERA ID menu. -2 Notes: • The CAMERA ID stops at the edges of the monitor screen. • The CAMERA ID moves faster if any of ^3/ Q/db/t©1 is kept pressed for a second or longer. To return to the CAM SET UP menu Move the cursor to RET and press El • The CAM SET UP menu appears. 2. Light Control Setting (ALC/ELC) You can select the light control mode according to the lens type. ALC: If you use the auto iris lens, select this parameter. ELC: If you use a fixed or manual iris lens, select this parameter. /-\ ** CAM SET UP * * CAMERA ID OFF ALC/ELC ALC SHUTTER AGC ON SENS UP OFF SYTJC INT MOTION DET OFF LENS DRIVE DC RET V_» 1. Move the cursor to the ALC/ELC parameter. 2. Select ALC or ELC. 4- 2-1. ALC Mode with SUPER-D ON Super Dynamic Function (SUPER-D) The important object in a scene is usually placed in the center of the monitor’s screen. In SUPER-D mode, more photometric weight is given to the center of the screen (where the important object is located) than to the edge of the picture (where a bright backlight would most likely be located). You can use the SUPER-D function if you select ALC. It eliminates interference by strong background lighting which makes the camera picture dark, such as a spotlight. /-\ ** CAM SET UP ** CAMERA ID OFF "1 ALC/ELC ALC SHUTTER --- AGC ON SENS UP OFF SYNC INT MOTION DET OFF LENS DRIVE DC RET V_/ 1. Press E3 after selecting ALC, the ALC CONT menu appears. 2. Move the cursor to the SUPER-D parameter and select ON. -2 f- ** AJuC CONT ** BACK LIGHT COMP SUPER-D OFF MASK SET LEVEL . . . I. + RET END v f -S ** ALC CONT ** BACK LIGHT COMP STJPER-D ¿Hi! LEVEL ...I. + RET END V 3. If you want to adjust the video output level, move the cursor to the “I" position. Adjust to the desired level by pressing €1 or D. 4. Move the cursor to RET and press El to return to the CAM SET UP menu. (To return to the camera picture, move the cursor to END and press S •) 5- 2-2. ALC Mode with SUPER-D OFF and ELC Mode Note: If ELC is selected, set MASK SET according to this procedure. 1. Move the cursor to the SUPER-D parameter and select OFF. (When you select ELC, SUPER-D is not available.) The item MASK SET appears on the menu. /- -\ ** ALC CONT ** BACK LIGHT COMP SUPER-D 'OFF, MASK SET LEVEL .. .1.. + RET END V 2. Move the cursor to MASK SET and press C=D . The 48 mask areas appear on the monitor screen. The cursor is blinking in the top left corner .of the screen. -26- 3. Move the cursor to the area where backlight is bright and press El to mask that area. The mask turns white. (When the cursor is moved on an area that has already been masked, the mask and cursor start blinking.) 4. Repeat step 1 to 3 to mask the desired area. To cancel masking, move the cursor to that area and press CEI. 5. After masking is completed, press [°] for 2 seconds or longer. The ALC CONT menu appears. 6. If you want to change the video output level (picture contrast), move the T cursor for LEVEL and adjust the level. 7. Move the cursor to RET and press [1] to return to the CAM SET UP menu. (To return to the camera picture, move the cursor to END and press the set button.) 3. Shutter Speed Setting (SHUTTER) Note: When ON is selected for SUPER-D on the ALC CONT menu, this item is not available. To select electronic shutter speed, select OFF for SUPER-D in the menu. You can select an electronic shutter speed of 1 /60 (OFF), 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, or 1/10 000 seconds. This function is effective to raise the sensitivity in low light conditions when OFF is selected for ALC. ** CAM SET DP ** CAMERA ID OFF '*). ALC/ELC ALC SHUTTER AGC ON SENS UP OFF SYNC I NT MOTION DET OFF LENS DRIVE DC RET Move the cursor to the SHUTTER parameter and select the electronic shutter speed. The preset values for SHUTTER (electronic shutter speed) change by pressing C3 or as follows: p-► OFF (...