Votos - , Puntuación media:
(
)
)
Fabricar: Panasonic
Tamaño del archivo: 2.05 mb
Nombre del archivo: AG6730P.PDF
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
120 Approx. 90 Approx. 60 Approx. 1.0 Not possible — — Intermittent travel 1 min. 7,200 5,400 3,600 60 Not possible — — Intermittent travel 2 min. 14,400 10,800 7,200 120 Not possible — — Intermittent travel 3 min. 21,600 16,200 10,800 180 Not possible — — Intermittent travel • The figures in the table apply when TM1 and TM2 for CAMERA SW TIMING on menu screen 4 have been set to 1 FRAME and 1 FIELD, respectively. To ascertain the camera switchover interval when TM1 and TM2 have been set to other timing values, multiply the timing setting by the figure given in the above table for the mode in question. **1/30 Since the cameras cannot be switched over in 1-field units in the 2H or 6H mode, the switchover takes place at 1/30-second intervals. Use 1/60-second as the basis for multiplication involving two or more fields. {For instance, with a 2 FIELD setting, multiply 1/60 by 2 which yields 1/30 sec.; with a 3 FIELD setting, multiple 1/60 by 3 which yields 1/20 sec.) Note: The figures for 000H (1-shot recording) apply when the 1-shot recording time on menu screen 5 has been set to 1 field. • The 6H mode is provided by model AG-6730 only. • The actual recording enable time will be slightly longer than the “Recording enable time" given in the above table although this will depend on the tape used. For instance, it is possible to record for about 26 hours using a 120-minute tape in the 24H mode. 56 Helpful Functions Applications Series Recording....................................... 58 1-Shot Recording ............................................................................60 Automatic Time Setting ................................. 64 Other Functions................................................................................66 Series Recording (Model AG-6730 only) 1,7 2 The steps for continuous recording using several time lapse VTRs are described in this section. Set this switch to “MENU.” ( (0 1 SPLAY) ] MODE T/D CHARACTER WHITE POSITION L-UPPER TIME SELECT 24H0URS DATA ON TIME ON T-MOOE ON 2 REV PLAY PLAY Press one of these buttons to display menu screen 2. ((VTR UOOE SELECT III (REC T-MOOE) OFF (TAPE IN] MOOE STOP (TAPE ENO) MOOE STOP ALARM IN STOP (EJECT OPERATION] MOOE EJECT 3 REW/@ 0/FF [яй S Press this button to select “TAPE END MODE.” ((VTR MODE SELECT 1]] (REC T-MOOE] OFF (TAPE IN) UOOE STOP (TAPE END] CM0ÙË STOP ) ALARM IN STOP (EJECT OPERATION) MOOE EJECT 4 Press one of these buttons to set to “REW.” ((VTR KOOE SELECT 1)] (REC T-MOOE] OFF (TAPE IN) MOOE STOP (TAPE END] (ЛООЕ few-) ALARM IN STOP (EJECT OPERATION) MOOE EJECT 5 REW/® 0/PF га и в Press this button to select “TAPE END ALARM IN.” CEVTR KOOE SELECT 1)] (REC T-MOOE) OFF (TAPE INI UOOE STOP (TAPE END] Jtfiai___ RE|_ ( ALARM IN STOP ) (EJECT OPeftAYIflNJ MOOE EJECT 58 3,5 4,6 6 Press one of these buttons to set to “CONTINUE.” PROGRAM llKOl)) - J OFF 1 TIME * ADJ Set this switch to “OFF.” i {VTR MODE SELECT 1)) (REC T-liOOE) OFF (TAPE IN! MODE STOP [TAPE END) , MOPS_REH - sETb ¿g6RtYilri"№ MODE EJECT NORMAL PICTURE NOTES I After having completed the settings, proceed with the regular recording operation using the first VTR. I Set the power switches of the second and subsequent VTRs to the “ON" position. I In order to prevent errors occurring in operation, it is recommended that the REC LOCK switch is set to “1" or "2." ■ Series recording with 2 or more time lapse VTRs The second VTR starts recording as soon as the tape-end in the first VTR is detected. ■ Alternate recording with 2 VTRs The second VTR starts recording as soon as the tape-end in the first VTR is detected. The first VTR starts recording again as soon as the tape-end in the second VTR is detected. 59 1-Shot Recording 1,10 2,5 The steps for 1-shot recording used for data files and animation, for instance, are described in this section. Set this switch to “MENU.” ((01 SPLAY]] MODE T/0 CHARACTER WHITE POSITION L-UPPÊR TIME SELECT 24H0URS OATA ON TIME ON T-MODE ON - Press one of these buttons to display menu screen 2. (IVTR MODE SELECT 1]] (REC T-MODE] OFF (TAPE IN] MODE STOP (TAPE ENO] MODE STOP ALARM IN STOP (EJECT OPERATION] MOOE EJECT 3 Press this button to select “REC T-MODE.” C CVTR MODE SELECT 11) cpraanD (TAPE IN] MODE STOP (TAPE EN0) MOOE STOP ALARM IN STOP (EJECT OPERATION) MODE EJECT 4 Press one of these buttons to display “OOOH.” [See Note 1] MOOE STOP (TAPE END] MODE STOP ALARM IN STOP (EJECT OPERATION] MODE EJECT 5 Press this button to display menu screen 5. (This step applies to model AG-6730 only.) (U-SKOT RECH FIELO 1 INTERVAL 3MIN 60 6,8 4,7,9 8 10 Press one of these buttons to select “FIELD.” (This step applies to model AG-6730 only.) Press one of REV ADV FWD ADV these buttons to set the 1-shot recording time. ttl-SHOT REO) FIELO 3 L.^'îJ Ll*\J INTERVAL 3MIN '*\v/ W\ / or \ ...