Votos - 5, Puntuación media: 4.4
(
)
)
|
Resumen del manual
The setting menu of the selected item appears. Precaution: Entering the setup menu is not possible while the ALARM LED is flashing. Make sure the alarm mode is canceled. To cancel the alarm mode, press the ALARM RESET button. All Reset Operation All reset allows you to reset all setup menu items to the factory settings if you are unsure about the correct settings. Proceed as follows: 1. Turn the power of this unit off. 2. Keep holding down the CURSOR button (►), the SELECT button (+), and the MENU button simultaneously, and press the POWER button. The buzzer beeps when all settings are reset to the factory settings. \ ** MAIN ** SYSTEM SETUP * ALARM BUZZES 25EC ALARM OUT 2SEC ALARM AUTO RESET OFF SEQ SETUP * TITLE SETUP * You can setup the following items: • SYSTEM SETUP • ALARM BUZZER • ALARM OUT • ALARM AUTO RESET • SEQ SETUP • TITLE SETUP See the following pages for details about the functions and settings. 2. How to Operate the Menus To select the desired item, press the CURSOR (-*, ►) buttons. Each time you press a button, the cursor moves to the next (►) or previous (m) item. -5- 3. Setup Menu Description 3-1. SYSTEM SETUP The SYSTEM menu lets you set the following items: • BORDER • VIDEO OUT • AUTO SKIP • VIDEO LOSS 1. Move the cursor to SYSTEM SETUP. 2. Press one of the SELECT buttons (- or +). The SYSTEM SETUP menu appears on the monitor screen. Note: To return to the MAIN menu, press the ESC button. r ** SYSTEM SETUP ** BORDER ON] VIDEO OUT QUAD AUTO SKIP OFF VIDEO LOSS ON v > «* SYSTEM SETUP ** BORDER OH VIDEO OUT QUAD AUTO SKIP OFF VIDEO LOSS OH v Borderline (white) 3-1-1. Border (BORDER) This parameter lets you set the appearance of the borders that divide the screen. 1. Move the cursor to BORDER. 2. Select ON or OFF. ON: The borders appear when QUAD is selected for VIDEO OUT. OFF: The borders do not appear. S \ •* SYSTEM SETUP * * BORDER OH] VIDEO OUT QUAD AUTO SKIP OFF VIDEO LOSS OH _ 3-1 -2. Quad/Sequence (VIDEO OUT) This parameter lets you select the quad picture or sequential single picture for display on the monitor screen. 1. Move the cursor to VIDEO OUT. 2. Select QUAD or SEO. QUAD: The quad picture appears on the monitor that is connected to the VIDEO OUT connector. SEQ: The single picture appears sequentially in the order to set on the of SEQUENCE SETUP submenu of the MAIN menu. "v ** SYSTEM SETUP ** BORDER OH VIDEO OUT ¡QUAD AUTO SKIP OFF VIDEO LOSS OH -6- 3-1-3. Auto Channel Skipping (AUTO SKIP) Setting This parameter lets you set automatic skipping of channels to which no camera is connected. 1. Move the cursor to AUTO SKIP. 2. Select ON or OFF. ON: Channels to which no camera is connected are skipped when SEQ is selected. OFF: No channels are skipped. r —N ** SYSTEM setup ** BORDER OH video out QUAD AUTO SKIP [OFFj video loss ON V > f * * SYSTEM SFTUP ** BORDER OH VIDEO OUT QUAD AUTO SKIP OM, VIDEO LOSS OH L / I I 3-1-4. Video Loss Checking (VIDEO LOSS) This parameter lets you activate a function that checks whether the video signal is being supplied to the VIDEO INPUT connector. 1. Move the cursor to VIDEO LOSS. 2. Select ON or OFF. OFF: The video loss alarm is ignored. ON: When video loss alarm is received, the picture switches to the quad format. The message "CHXX LOSS” appears on the monitor screen and the alarm buzzer starts beeping. /• ** SYSTEM SETUP ** BORDER ON VIDEO OUT QUAD AUTO SKIP OFF VIDEO LOSS OFFJ 3-2. ALARM BUZZER This parameter lets you adjust the buzzer time between 1 and 30 seconds and 1 and 5 minutes. 1. Move the cursor to ALARM BUZZER. 2. Select the buzzer time. OFF: The alarm buzzer does not beep when an alarm signal is received. 1-30 SEC, 1-5 MIN: The buzzer keeps on beeping for the duration you set. EXT: The alarm buzzer keeps on beeping until an operation is performed from an external equipment such as a time lapse VCR. - \ ** MAIN ** SYSTEM SETUP * ALARM BUZZER f2SEC ALARM OUT 2SEC ALARM AUTO RESET OFF SEQ SETUP * TITLE SETUP * r>OFF ^ 1SEC <^->2SEC......30SEC MIN......5MIN ■ EXT -7- 3-3. ALARM OUT This parameter lets you adjust the duration the alarm signal is output between 1 and 30 seconds and 1 and 5 minutes. 1. Move the cursor to ALARM OUT. 2. Select the duration the alarm signal is output. 1-30 SEC, 1-5 MIN: The alarm signal is output for the duration you set. f —\ *• MAIN ** SYSTEM SETUP « ALARM BUZZER 2 SEC ALARM OUT 2 SEC ALARM AUTO RESET OFF SEQ-SETUP-* TITLE SETUP * v J N ** MAIN** SYSTEM SETUP * ALARM BUZZER 2 SEC ALARM OUT ! 2 SEC, ALARM AUTO RESET OFF SEQ SETUP « TITLE SETUP * k- J 1 SEC......30SEC 1 MIN......5MIN 3-4. ALARM AUTO RESET This parameter lets you set the time until the unit recovers after receiving the alarm signal. 1. Move the cursor to ALARM AUTO RESET. 2. Select the recover time. OFF: The alarm condition is main...