Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
The following functions are built in. SETTING PROCEDURESSETUP 1. Camera Identification (CAMERA ID) Setting 1. CAMERA SETUP MENU Moves the cursor upward and selects items in the CAM SET UP menu. (1) Auto Light Control (ALC) You can use the camera identification (CAMERA ID) to assign a name to the camera. The camera This camera utilizes an on-screen user setup menu. (2) The SUPER-D2 function eliminates interference by strong background lighting which Color CCTV Cameras makes the camera picture dark, such as a spotlight. ID consists of up to 16 alphanumeric characters. The camera ID display can be switched on or off !0 DOWN button (I) (D) on the monitor screen. Moves the cursor downward and selects items in the CAM SET UP menu. Dynamic range of 46 dB (Typ) (3) Internal, Line-Locked, Multiplexed Vertical Drive (VD2) Sync (4) Auto/Manual White Balance Function • Opening the Setup Menu Operating Instructions . . . . ** CAM SET UP ** CAMERA ID OFF ALC ALC SHUTTER --- AGC ON(HIGH) SENS UP OFF SYNC INT WHITE BAL ATW1 MOTION DET OFF DIP SW END SET UP DISABLE 3. Move the cursor to the character you want to edit Check the current settings on the menu. !3 BW switch (SW4) by pressing I(L) / I(R) / I(U) / I(D). To edit the CAMERA ID !1 SET button (I) (S) Press and hold down I(S) for 2 seconds or 1. Move the cursor to CAMERA ID. Activates an item selected in the CAM SET UP menu. (5) Electronic Shutter Function more. The factory default setting is OFF. 2. Signal-to-noise ratio of 50 dB (Equivalent to AGC Off) BW AUTO1 LEVEL switch (SW5) Press I(S). The CAMERA ID menu appears. !2 2. 3. Minimum illumination of 2.0 lx (0.20 footcandle) (WIDE) (Color mode) The CAM SET UP menu appears on the monitor as Character Cursor WV-CW474AF Selects the illuminance level in LOW or HIGH mode for B/W. The factory default setting is HIGH. The cursor on the letter “0” is highlighted. Minimum illumination of 0.2 lx (0.02 footcandle) (WIDE) (Black-and-white mode) Minimum illumination of 0.8 lx (0.08 footcandle) (WIDE) with the WV-CW2C optional dome cover 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ ().,'":;&#!?= +-*/%$ SPACE POSI RET END RESET ................ Area Pointer shown at right. Model Nos. (Color mode) Minimum illumination of 0.1 lx (0.01 footcandle) (WIDE) with the WV-CW2C optional dome cover WV-CW474AS Character Switches to AUTO1 between color and black-and-white picture in response to light input. The Area 4. After selecting the character, press I(S). The factory default setting is OFF. (Black-and-white ) 4. 480 lines of horizontal resolution (Color normal mode) Before attempting to connect or operate this product, 510 lines of horizontal resolution (Color High Resolution mode) selected character appears in the editing area. !4 AP gain switch (SW3) (The pointer in the editing area moves to the right Command Refer to the following sections for a detailed description of menu items. If you decide not to make automatically at this moment.) Editing Selects the aperture gain level to SHARP or SOFT. The factory default setting is SHARP. please read these instructions carefully and save this manual for future use. 570 lines of horizontal resolution (Black-and-white mode) any changes after checking the current settings, move the cursor to END in the bottom line, and 5. Repeat the steps above until all characters are 5. High quality picture: (a) 2H type vertical enhancer for greater picture sharpness press I(S) to close the setup menu. !5 UPSIDE DOWN switch (SW2) edited. CAMERA ID menu Turns the picture upside down by selecting ON. The factory default setting is OFF. N0204-1034 3TR002376BAA Printed in Japan (b) Chroma averaging circuit for better color signal-to-noise ratio Note: If no button is pressed for 5 minutes while a setup menu is being displayed on the monitor (c) Minimum of aliasing on fine objects !6 Sync switch (SW1) screen, it is automatically closed and the mode returns to the normal camera picture. To enter a blank space in the CAMERA ID (d) Expanded dynamic range by use of knee circuit Switches internal sync (INT) mode or line-lock (LL) mode. The factory default setting is INT. Move the cursor to SPACE and press I(S). (e) Highlight aperture correction for greater picture detail of bright objects Caution: Before attempting to connect or operate this 6. Selectable electronic sensitivity enhancing modes including AUTO, MANUAL and OFF !7 Monitor output Jack (3.5 Diam. mini jack) To replace a specific character in the CAMERA ID product, please read the marking on the top. 7. Built-in Digital Motion Detector Connects the LCD monitor and such devices with 3.5 diam. 2-pole L-type plug for checking 2. SETUP OPERATION 1. Move the cursor to the editing area by pressing I(D). t NOTE: This equipment has been tested and foundto comply with the limits for a Class A digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference when theequipment is operated in a commercial ...