Fabricar: D-Link
Tamaño del archivo: 1.06 mb
Nombre del archivo:
|
Resumen del manual
Please download it from • In Mac OS X 10.7.x, Java applets are disabled by default. Click the Finder > Applications > Utilities > Java Preferences and check the Enable applet plug-in and Web Start applications option. • The ActiveX® controls in IE will install automatically if needed. We suggest that you make sure that you have enabled the related options in Tools > Internet Options > Security > Custom Level. ENGLISH Mount the Camera Please refer to the steps below to assist you with mounting the camera. We suggest that you configure the camera before mounting. 1. Place the mounting bracket where you want to position the camera and use a pencil to mark the holes. 1 2. Depending on the material of the wall or ceiling, use proper tools to drill two holes or screws where you marked. If the wall is made out of concrete, drill the holes first, then insert the plastic anchors to support the screws. 2 3. The power and Ethernet cables can be concealed behind the mounting bracket. Run the cables through the back of the mounting bracket, securing them with the built-in guides. Be sure to leave enough cable length protruding from the top to allow connection to the camera. 3 4. Fasten the mounting bracket to the wall using the screws provided. 4 5. Using the supplied thumbscrew, fasten the camera to the mounting bracket. Connect the power and Ethernet cables to the camera. 5 6. Adjust the angle of the arm on the mounting bracket as required. Tighten the thumbscrew to lock the arm in place. 6 Do not overtighten the screws as this may crack the bracket. ENGLISH Camera Use Without the mydlink Service You might have some limitations without using the mydlink service: • Not be able to manage multiple devices with a single account. • Need a static IP address or DDNS account to access the camera remotely. • Need several steps to manually setup remote access to the camera behind a router. • Not be able to view the image and modify the settings at the same time on mobile devices. If you do not want to use the mydlink service now, run the Setup Wizard and choose the option “I don’t want to enable mydlink cloud service”. You can run the Setup Wizard again when you want to enable the mydlink service in the future. Check below if your camera behind a router or firewall. Configuring the Camera Behind a Router To log in to the camera’s setup page, go to SETUP > Network Setup, select “Static IP Address” and assign an IP address to the camera. The IP address must be in the same subnet mask of the router’s LAN IP. The camera’s default IP address is 192.168.0.20. Enter the HTTP (80 by default) service port on this page. Leave the other settings to the default and click Save Settings to finish. Log in to the router’s setup page and add rules in the Virtual Server or Port Forwarding sections by entering the camera’s IP address and service ports. Then you can use the router’s Internet (WAN) IP address and camera’s HTTP port to access the camera remotely. ENGLISH D-ViewCam™ and Network Video Recorders D-Link provides software (D-ViewCam) and hardware (NVRs) solutions for advanced users to choose from to manage their cameras and record videos. Depending on the users needs, one or the other solution can be used to supplement their camera system. D-ViewCam enables centralized management of multiple network cameras, supporting up to 32 network cameras and up to 64 users. With a dedicated computer it offers digital monitoring and recording with a wide array of features, including scheduled, motion and manual recording options for individual needs. Download D-ViewCam at Select your camera and select “D-ViewCam” under Wizard. DCS-5020L Laptop Internet Router Modem Mobile Device Network Video Recorders (NVRs) are standalone storage devices with a powerful embedded system that can record video from up to 9 network cameras located on local or remote sites into a dedicated HDD storage without turning on a PC. Video and camera management can be done as needed using any computer attached to the network. DCS-5020L Laptop Internet Router Modem DNR-322L Mobile Device ENGLISH Notes ENGLISH Notes Technical Support This guide is only for the first time configuration. Please refer to the user manual to learn more or visit for more information. Also feel free to contact us. U.S. and Canadian customers can contact D-Link Technical Support through our website or by phone. USA 877-453-5465 Canada 800-361-5265 Version 1.0 March 8, 2013 Copyright ©2013 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries. Other trademarks are the property of their respective owners. Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materi...