Votos - 4, Puntuación media: 4.3
(
)
)
|
Resumen del manual
4. In the Connection Settings section, select the Protocol where the PTZ camera is connected and IP Camera Site that IP or URL of IP camera. Then, click Save to keep the settings. 5. Use the IP PTZ control panel and adjust the position of the IP PTZ camera. 6. In the Preset Setting section, select the preset number to assign a number for the IP PTZ camera current position. Set the DwellTime (1-60 sec) for how long the IP PTZ camera stays in that position before it moves to the next one. If you want to add description, check the Show Preset Name box and in the Preset Name text box, type the word. When done, click Save to keep the settings. 7. Repeat step 4 & 5, if you want to save another PTZ camera position. 8. Restore AutoPan Time: set a time period for restoring auto path function after the IP PTZ camera has been moved. Mark the check box and set the time period in second. 9. When is done, click OK to save the setting or Click Cancel, to leave without saving the new setting. 41 Chapter 5 Customizing the NV DVR System In the Preview/Advanced screen mode, click button to customize your NV DVR. When the NV DVR configuration setup selection appears, select and click the buttons you want to change the setting. 5.1 System Setting In the System Setting dialog box, click OK to accept the new settings, click Cancel to exit without saving, and click Default to revert back to original factory setting. (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (1) Storage Path Set the directory on where to save the data. When there is not enough free space to record one hour data, the system automatically replaces the oldest data. In case you have more than one storage path, the system automatically saves the data to the next storage path. You may also add additional network-attached storage (NAS) for extremely high storage capacity. Select the Enable network storage check box to send the recorded video in network-attached storage. To add network storage, the Internet storage drive/folder must be mapped as Network Driver in DVR server. To know how to assign or connect to a network drive, please refer to your Windows help file and search “Map Network drive”. By default the data is stored in C:\Data, to insert another storage path, click Add. To remove the selected path, click Delete. If you want the system to automatically erase the data after a certain days, enable the Delete recorded data after check box and enter the numbers of days in Days text box. If you want the system to automatically erase the event and alarm log after a certain days, enable the Delete event and alarm log after check box and enter the numbers 43 Chapter 5 Customizing NV DVR System of days in Days text box. (2) Hard Disk Calculator Estimate the hard disk recording capacity. The result of calculation is a rough value which only for reference. The hard disk record capacity will be varied by the real record quality and complexity of video scene. Click , the hard disk calculator windows will show up. Total Recording time is the current hard disk recording capacity. Enter the expect hard disk size or expect recording time in Expected HD Size or Expected Record time, and then click Calculate button. Click OK to exit the hard disk calculator windows. The hard disk calculation is based on the recording setup and current hard disk setup. (3)Language Customize the system to display the tool tips and dialogs based on the selected language. By default the language is in English. (4) Video Standard Change and select the proper video system according to your camera video system. If the video system setting is wrong, the video would appear abnormal. (5) Attention Please Check the attentiveness of the person who is monitoring the system. You may set the number of times the Attention dialog box to appear in a day in Times per day text box. To check the graph on how fast the person response, click Analysis. When this feature is enabled, the Attention dialog box would appear. The person who is monitoring the system must enter the same number that appears from the left box at the right text box and then click OK. (6) TV Out Select the camera you want to appear on TV and set the time gap from 3 to 10 sec. before it switches to the next camera. -Advance button (The Advance functions only for NV6000 Express.) Select the video card channel and camera that user wants to display on TV. In Advance mode, user has two types of display selection – Autoscan and Fixed layout. • Autoscan (1) Select the video card channel from drop down list. If user only installs one NV card 44 NV3000/5000/6000(EXP)/7000H User Manual on the computer, then there is only one video card channel for selection. (2) Select the display mode as Autoscan. (3) Preview screen: Live camera video would be displayed here. (4) Video Mode: Select the video mode user wants to display on screen. The system will auto cycle switch to display the next channels. (1) (2) (3) (4) • Fixed Layout (1) Select the video card channel ...