Votos - 4, Puntuación media: 3.3
(
)
)
|
Resumen del manual
To navigate in the OSD menu, press to call up and exit from the main menu or sub-menu display. Then use the and or and buttons to go up and down and select the items in the menu list or change the settings. Use the or button to enter sub-menu or make a selection. You can also use the and or and buttons to move the selection to the left and right. The red frame turns yellow when you are making a selection. 13 Description OSDMENU123 4123 4QUADMPEG410GOODENGLISHMAIN MENUCAMERA SELECTRECORD SELECTRECORD MODEVIDEO FORMATRECORD FRAMERATEVIDEO QUALITYRECORD SCHEDULESUBMENUHARD DRIVE SETUPSENSOR SETUPMOTION SETUPLANGUAGE SETUP CAMERA SELECT : Enable/disable the channel number to display the video on the surveillance screen. RECORD SELECT : Enable/disable the channel number to record video. i The channels that are enabled in the camera select setting can only be set for video recording. RECORD MODE : Select D1/CIF recording mode. Under D1 mode, the video recording is in 720x480 or 720x576 resolution and takes turns from one channel to the next one. D1 channel is recorded at a maximum frame rate of 15fps/12fps (NTSC/PAL) for each channel. User can switch to view the video in single full screen or QUAD screen. Whereas in CIF mode, video recording is at a 360x240 or 360x288 resolution, but each video is recorded in 30fps/25fps (NTSC/PAL). User can also view the video in single full screen or QUAD screen. VIDEO FORMAT : The recorded video is in MPEG4 format. RECORD FRAME RATE : Set the number of frames per second to be recorded. Refer to the table below for the available record frame rate settings. The higher the frame rate, it uses more hard disk space. Video Standard NTSC PAL Record Mode EACH 15, 5, 1 12, 5, 1 QUAD 30, 15, 10, 5, 1 25, 12, 5, 1 VIDEO QUALITY : Select the video quality setting from BEST, GOOD or NORMAL. Choosing NORMAL allows you to record more hours but the quality of the recorded video is moderate. For more information about the recording time, please visit our website and look for EB1504 MPEG4. LANGUAGE SETUP : Select from the available language. 14 OSDMENUDescriptionRECORD SCHEDULE00 : 00 - 01 : 0001 : 00 - 02 : 0002 : 00 - 03 : 0005 : 00 - 06 : 0006 : 00 - 07 : 0007 : 00 - 08 : 0008 : 00 - 09 : 0009 : 00 - 10 : 0010 : 00 - 11 : 0011 : 00 - 12 : 0012 : 00 - 13 : 0004 : 00 - 05 : 0003 : 00 - 04 : 00ALWAYS RECALWAYS RECALWAYS RECALWAYS RECALWAYS RECALWAYS RECALWAYS RECALWAYS RECALWAYS RECALWAYS RECALWAYS RECALWAYS RECALWAYS RECOSDMENUDescriptionRECORD SCHEDULE00 : 00 - 01 : 0001 : 00 - 02 : 0002 : 00 - 03 : 0005 : 00 - 06 : 0006 : 00 - 07 : 0007 : 00 - 08 : 0008 : 00 - 09 : 0009 : 00 - 10 : 0010 : 00 - 11 : 0011 : 00 - 12 : 0012 : 00 - 13 : 0004 : 00 - 05 : 0003 : 00 - 04 : 00ALWAYS RECALWAYS RECALWAYS RECALWAYS RECALWAYS RECALWAYS RECALWAYS RECALWAYS RECALWAYS RECALWAYS RECALWAYS RECALWAYS RECALWAYS REC RECORD SCHEDULE: By default, in 24 hours, the recording schedule is set to always record every hour. Refer to the table below to customize the recoding condition. Condition Description NO REC Disable video recording. ALWAYS REC Record non-stop. SENSOR REC Start recording when the sensor has activated. 2006 / 04 / 2017 : 54 : 50ONONONOFFNOSUBMENUPASSWORD CHANGEVIDEO ADJUSTMENTDATETIMEAUTO RECORDAUTO SCANPASSWORD SETUPAUDIO RECORDAUDIO MUTEOFFCOLOR STABILITY PASSWORD CHANGE : Set a security combination number. This is a security measure that prevents formatting of the hard disk or changing the system settings. The factory default password is 111111. User could use , , , , and to set each digit of password. PASSWORDCURRENTNEWCONFIRM VIDEO ADJUSTMENT : Select the camera number and set to adjust the video brightness, contrast, hue, and saturation value. 1050050000024MODE 1VIDEO ADJUSTMENTCAMERABRIGHTNESSCONTRASTHUESATURATIONCOLOR PHASENORESET TO DEFAULT VALUE DATE : Set the current date. i Please set the correct date and time when you use this DVR at the first time to make sure the time of recorded video file is correct. TIME : Set the current time. 15 OSDMENUDescriptionOSDMENUDescription AUTO RECORD : Enable/disable auto continue recording when interrupted (i.e., power breakdown, video playback or configuration setup). It continue recording after 10 second of idleness. This is applicable in Always Record mode. AUTO SCAN : Enable/disable auto cycle switch to display the next channel when in full screen preview. PASSWORD SETUP : Enable/disable full system password protection. This would prevent unauthorized user to stop video recording, change system settings and formatting the hard disk. AUDIO RECORD : Enable/disable audio recording. To record sound, make sure the mic is connected to the unit. AUDIO MUTE : Enable/disable to hear audio sound. To hear sound, make sure the unit is connected to a speaker. i If you want to hear the voice when you playback the recorded file on this DVR, please make sure that you have selected Audio Mute Off. 16 OSD MENU Description YESHARD DRIVE SETUPOVERWRITE ENABLEDHD1 SIZE 3...