Votos - 9, Puntuación media: 3.9
(
)
)
|
Resumen del manual
Then use the ^ and Ў or and buttons to go up and down and select the items in the menu list or change the settings. Use ^or (play) button to enter sub-menu or make a selection. User can also use 15 the ЎЎ and ЎЎ buttons to move the selection to the left and right. The red frame turns yellow when users are making a selection. If the unit is currently recording the video, user may have to stop video recording to change the settings. OSD MENU 1 2 3 4 1 2 3 4 D1 MPEG4 60 GOOD ENGLISH MAIN MENU CAMERA SELECT RECORD SELECT RECORD MODE VIDEO FORMAT RECORD FRAMERATE VIDEO QUALITY RECORD SCHEDULE SUBMENU HARD DRIVE SETUP SENSOR SETUP MOTION SETUP LANGUAGE SETUP IRJACK SETUP Description CAMERA SELECT : Enable/disable the channel number to display the video on the surveillance screen. RECORD SELECT : Enable/disable the channel number to record video. i The channels that are enabled in the camera select setting can only be set for video recording. RECORD MODE : Select D1/CIF recording mode Under D1 mode, the video recording is in full screen resolution and takes turns from one channel to the next one when Auto Scan enables. Each channel is recorded only at a maximum frame rate of 15fps. User can switch to view the video in single full screen or QUAD screen Whereas in CIF mode, video recording is at a lower resolution, but each video is recorded in 30fps/25fps (NTSC/PAL). User can switch to view the video in single full screen or QUAD screen VIDEO FORMAT : The recorded video is in MPEG4 format. RECORD FRAME RATE : Set the number of frames per second to be recorded. Refer to the table below for the available record frame rate settings. The higher the frame rate, it uses more hard disk space. Video Standard NTSC PAL Record Mode D1 60, 20, 4 48, 20,4 CIF 120, 60,40, 20, 4 100, 48, 20, 4 VIDEO QUALITY : Select the video quality setting from BEST, HIGH, GOOD, MEDIUM, NORMAL or LOW. Choosing NORMAL allows user to record more hours but the quality of the recorded video is moderate. LANGUAGE SETUP : Select from the available language 16 OSD MENU OSD MENU Description JACK SETUP The DVR unit provides a jack port for external extend line for system LED indicator or IR receiver. It is convenient for user to easily indicate the DVR unit status or remote control the DVR unit when the DVR unit is installed at hide place. Select LED for external extent system LED indicator line or IR for external remote control receiver line. i The external LED indicator line is optional. The external IR receiver line is included in package contents. RECORD SCHEDULE 00 : 00 - 01 : 00 01 : 00 - 02 : 00 02 : 00 - 03 : 00 05 : 00 - 06 : 00 06 : 00 - 07 : 00 07 : 00 - 08 : 00 08 : 00 - 09 : 00 09 : 00 - 10 : 00 10 : 00 - 11 : 00 11 : 00 - 12 : 00 12 : 00 - 13 : 00 04 : 00 - 05 : 00 03 : 00 - 04 : 00 ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC ALWAYS REC RECORD SCHEDULE: By default, in 24 hours, the recording schedule is set to always record every hour. Refer to the table below to customize the recording condition. Condition Description NO REC Disable video recording. ALWAYS REC Record non-stop. MOTION REC Start recording when any movement is detected SENSOR REC Start recording when the sensor is activated. 2006 / 12 / 11 17 : 54 : 50 ON ON ON OFF NO SUBMENU PASSWORD CHANGE VIDEO ADJUSTMENT DATE TIME AUTO RECORD AUTO SCAN PASSWORD SETUP AUDIO RECORD AUDIO MUTE NTSC ON VIDEO SYSTEM TEMERATURE SET BUZZER PASSWORD CHANGE : Set a security combination number. This is a security measure that prevents formatting of the hard disk or changing the system settings. The factory default password is 111111. User could use number key ( 1 2 3 4 5 6 7 8 90 ) on the remote control to enter each digit of password. Or, use ^ and Ў or and to set the password. PASSWORD CURRENT NEW CONFIRM 17 OSD MENU OSD MENU Description VIDEO ADJUSTMENT : Select the camera number and set to adjust the video brightness, contrast, hue, and saturation value. 2006 / 12 / 11 17 : 54 : 50 ON ON ON OFF NO SUBMENU PASSWORD CHANGE VIDEO ADJUSTMENT DATE TIME AUTO RECORD AUTO SCAN PASSWORD SETUP AUDIO RECORD AUDIO MUTE NTSC ON VIDEO SYSTEM TEMERATURE SET BUZZER 1 050 050 000 024 VIDEO ADJUSTMENT CAMERA BRIGHTNESS CONTRAST HUE SATURATION NORESET TO DEFAULT VALUE DATE : Set the current date. i Please set the correct date and time when you use the DVR system at the first time to make sure the time of recorded video file is correct. TIME : Set the current time. AUTO RECORD : Enable/disable auto continue recording when interrupted (i.e., power breakdown, video playback or configuration setup). It starts to record after 10 second of idleness. This is applicable in Always Record mode. AUTO SCAN : Enable/disable auto cycle switch to display the next channel when in full screen preview. PASSWORD SETUP : Enable/disable full system password protection. This would prevent unauthorized user to stop video recording, change system se...