Votos - , Puntuación media:
(
)
)
Fabricar: AVerMedia Technologies
Tamaño del archivo: 2.51 mb
Nombre del archivo: 11596ab0-327a-49ad-b8f6-2708e486f441.pdf
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
25 Chapter 6 ImageVerification ...........................................................27 6.1 To Run the ImageVerification ................................................................... 27 Chapter 7 Warranty Notice..............................................................28 Chapter1IntroductionChapter1Introduction EB1304 MPEG4+ is a 4-channel stand-alone DVR unit that provides real-time monitoring and digital recording of surveillance video. Up to four video cameras and four sensor devices can be hooked up to this DVR unit. It is also equipped with an output relay that allows connection of an alarm device. Surveillance, digital recording and playback are controlled through the front panel buttons. With the On-Screen-Display (OSD) menu, user can customize video recording setting, sensor and alarm settings, password protection, hard drive recycling, and more. Through USB connection, user can playback the video with the bundled software, segment the video to only keep the wanted portion and save it in MPG/AVI format, and capture still image and save it in BMP format or print it. Surveillance video is recorded in high-quality MPEG4 format. Two recording modes are supported, D1 Mode can record video from each video camera in 720 x 480 resolution at 60fps and CIF Mode can record video in 360 x 240 resolution and up to 120 fps/100 fps (NTSC/PAL). Connecting cameras, sensors, alarm, and display device 1 1.1 Package Content (1) (2) AVerMedia® AVerDiGiEB1304MPEG4OperationManual+ (3) (4) (5) (6) (7) (8) (1) AVerDiGi EB1304 MPEG4+ unit (2) Remote Control (batteries included) (3) Quick Installation Guide (4) Power Cord * The power cord varies depending on the standard power outlet of the country where it is sold. (5) Power Adapter (6) DVR accessories (including 4 screws) (7) Software CD (User Manual included) (8) USB Cable 1.2 Features and Specifications • Non-PC stand-alone security digital video recorder • 4 composite video inputs and 1 composite output • VGA output for LCD and CRT monitor display • OSD control 2 • MPEG4 video compression • Auto-detect NTSC or PAL video system • Supports 1 hard disk drive (not included) • Full-screen resolution: Display: 720 x 480 (NTSC), 720 x 576 (PAL) Recording: 720 x 480 (NTSC), 720 x 576 (PAL) • Display and recording frame rate: D1 mode: 60/50fps(NTSC/PAL) CIF mode: 120/100 fps (NTSC/PAL) • Scheduled recording (00:00~23:00 set by hour ) • Search for recorded videos by date/time/event • Input/Output: 4 sensor inputs and 1 relay output control • Multiple language operation screens • One USB 2.0 Port • Software CD with USB playback application for Windows 2000/XP 1.3 Front Panel (1)(2) (3) (4) NameFunction (1) DVR Power LED : Light when the unit is on (2) HDD LED : Indicate the hard disk running state. Light when the HDD is running (3) IR Sensor : Receive the signal from the remote control to operate the unit (4) USB 2.0 Port : Connect to PC for video transfer or playback 3 1.4 Back Panel NameFunction (1) Audio Out : Output the audio signal to a speaker (2) Audio In : Input the audio signal from a microphone or audio output device. The audio is embedded with channel 1 (3) CH1 : Input the video camera signal and display it on channel 1 (4) CH2 : Input the video camera signal and display it on channel 2 (5) CH3 : Input the video camera signal and display it on channel 3 (6) CH4 : Input the video camera signal and display it on channel 4 (7) Video Out : Output the video signal to a TV The DVR unit support 2 video output ports and you can only select to output the video either from the VGA OUT or VIDEO OUT (8) VGA OUT : Output the video signal to a CRT or LCD monitor (9) Sensor In & : Support up to 4 sensor device and 1 relay device (Relay: 1A @ Alarm Out 125V AC/30V DC) (10) TV-VGA : Switch to select the video output. Make sure to set the video output before turning on the unit (11) 12V DC : Connect the power adapter into this port 1.5 Setting Up the DVR Unit 1.5.1 Installing the Hard Disk The DVR unit allows you to install one hard disk. Before installing the hard disk, make sure to set the hard disk master jumper setting. Adjust the jumper setting according to the instructions on the hard disk label. i Use 40GB/ 7200RPM IDE hard disk or larger is recommended 4 5 Follow the illustrated instructions below to install the hard disk: 1. Loosen all screws 2. Push the cover backward and lift 3. Loosen the hard disk rack 4 screws 4. Secure the brackets on the hard disk 5. Connect the end of the IDE cable and the power connector to the hard disk 6. Secure the hard disk inside the unit then replace unit cover 6 7. Push the cover forward 8. Secure the cover 9. You may now connect all the cables. When the power is connected, the Power LED light turns on 7 1.5.2 Connecting Devices The back panel of the DVR unit, you can connect up to 4 video cameras, 4 sensor devices, 1 alarm device and output video to a TV or CRT/LCD monitor. Connecting the unit to a PC, through USB connection, the b...