Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
Descriptions of the user interface and indications on LCD 3. How to install batteries 4. How to use recording function 5. How to change recording quality (SP, LP) 6. How to change recording sensitivity 7. How to set voice-operated recording (VOR) function 8. How to switch directory to directory 9. How to play a recorded message 10. How to record with other devices (CD / Cassette players) 11. How to record your conversation from a phone call 12. How to check the memory capacity on the recorder 13. How to delete one of the recorded messages 14. How to delete all recorded messages 15. How to set the time and date 16. How to set the alarm function 17. How to set the time-recording function 18. How to use the repeat function 19. How to use the bookmark function 20. How to use the comparison function 21. Additional functions 22. Specification 1. WARNINGS AND INSTRUCTIONS a. Please do not drop on the floor or put the unit where it can be exposed to high force impact. This will damage the unit beyond its repairable capacity. b. Please do not keep this unit in places with extreme heat or cold. Any direct exposure to extreme temperatures will permanently damage the unit c. High pressure on the surface of the LCD screen will result in damaging the message indicators of the screen. Note: Old batteries or weakened batteries may cause quality failure in recording. 4. HOW TO USE RECORDING FUNCTION a. Press and hold the REC/STOP key for about 2 seconds to enter the recording mode. You will see the record indication on the LCD display. b. Press the PLAY/OK key to pause recording while in the recording process. c. Press the PLAY/OK key again if wish to continue recording while in the pause mode. d. Press the REC/STOP key to stop recording. Note: The total number of the recorded voice message indicator will increase automatically by 1 5. HOW TO CHANGE THE RECORDING QUALITY (SP, LP) a. Press and hold the PLAY/OK key for about 2 seconds to enter the setup mode. b. Use the VOL + or VOL – key to locate the “SEL COdEC” menu. c. Press the PLAY/OK key to enter the “SEL COdEC” setup page. d. Use the VOL + or VOL – key to switch from “SP” to “LP” or from “LP” to “SP”. e. Press the PLAY/OK key to confirm your choice on the quality selection. f. Press the REC/STOP key to exit the setup mode completely. Note: The SP is used for the high record quality, and the LP is used for the lower record quality with longer recording time option. 6. HOW TO CHANGE THE RECORDING SENSITIVITY a. Press and hold the PLAY/OK key for about 2 seconds to enter the setup mode. b. Use the VOL + or VOL – key to locate the “rEC SENSE” menu. c. Press the PLAY/OK key to enter the “rEC SENSE” setup page. d. Use the VOL + or VOL – key to select one of the options, “1” through “5”. e. Press the PLAY/OK key to confirm your choice on the recording sensitivity. f. Press the REC/STOP key to exit the setup mode completely. Note: The higher number indicates higher sensitivity. With the higher sensitivity setting, the voice-operated recording function (VOR) will respond to the voices or noises more sensitively. 7. HOW TO SET THE VOICE-OPERATING RECORD (VOR) FUNCTION a. Press and hold the PLAY/OK key for about 2 seconds to enter the setup mode. b. Use the VOL + or VOL – key to locate the “UOr MOdE” menu. c. Press the PLAY/OK key to enter the “UOr MOdE” setup page. d. Use the VOL + or VOL – key to select “ON” if you want to set the VOR function on or to select “OFF” if you want to set the VOR function off.. e. Press the PLAY/OK key to confirm your choice. f. Press the REC/STOP key to exit the setup mode completely. Note: If your recording function is ON with the VOR function also ON, the unit will record a message automatically whenever it hears or senses a voice. While the unit is in VOR mode and there are no noises or voice present, it will automatically pause the recording until it noise or voice reactivates the VOR. 8. HOW TO SWITCH FROM DIRECTORY TO DIRECTORY a. Press and hold the PLAY/OK key for about 2 seconds to enter the setup mode. b. Use the VOL + or VOL – key to locate the “SEL dir” menu. c. Press the PLAY/OK key to enter the “SEL dir” setup page. d. Use the VOL + or VOL – key to select one of the directories from “a” through “c”. e. Press the PLAY/OK key to confirm your choice on the directory selection. f. Press the REC/STOP key to exit the setup mode completely. Note: The directories are used to separate recorded files. For example, if you record a message in the directory “b”, that particular message can only be reproduced from directory “b”. 9. HOW TO PLAY PREVIOUSLY RECORDED MESSAGE a. Turn on the recorder. b. Switch to the directory which contains a recorded message you want to play. c. Use the VOL + or VOL – key to select the message. The file number and recording time for each message will be displayed on LCD while browsing the messages in the directory. d. Select the message and press the PLAY/OK key to play it. e. Press the PLAY/OK key if you want to paus...