Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
WHITE is Ground (to braid of coax). + + * V- = WHITE IMPORTANT!!! Power down all Aiphone equipment before performing any modifications! INSTALLATION INSTRUCTIONS: MY-2CD OR MYH-2CD: 1. Open monitor from the back by removing four small screws. 2. Locate the 2-pin male connection (CN5) near the base of the monitor. 3. Plug in 2-pin connector with black and white leads, and run wires out of the back of the unit, along with the Blue and Yellow wires (existing). 4. Connect the Black and White wires to the coax cable leading to the remote video monitor or recorder. 5. The video signal from this unit is composite, 1V peak to peak. The video signal will only be present when a picture is seen on the monitor that the 2-pin connector is plugged into. MYW-P3L: 1. Open the adaptor from the bottom. 2. At the base of the PC board, locate the 2-pin male connection (CN-5) next to SW2 and the Reset Switch. 3. Plug in the 2-pin connector. Connect the Black and White wires to the coax cable leading to the video monitor or recorder. 4. The video signal from this unit is composite, 1V peak to peak. The video signal will only be present when the is present on the monitor that the 2-pin connector is plugged into. Aiphone Communication Systems 1700 130th Ave. N.E. Bellevue, WA 98005 (425) 455-0510 FAX (425) 455-0071 TOLL FREE TECHNICAL SUPPORT: (800) 692-0200 TOLL FREE FAX LINE: (800) 832-3765 TECHNICAL SUPPORT E-MAIL: tech-serv@aiphone.com Video Output 082898bkjd...