Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
ENGLISH
Quick Install Guide
Installation
Cloud Camera 2200
Zero Configuration Setup (with mydlink Cloud Router only)
Easy Setup (all other routers)
Step 9:
Click on the Start button to start the wizard and fol ow the instructions from
Note: The Zero Configuration Setup will only work with a registered Cloud Router
Step 1:
the Instal ation Wizard to finish setting up your camera.
and an active mydlink account. If you do not have a mydlink Cloud Router, please
Open a web browser and go to http://www.mydlink.com/download. Click your
skip to the Easy Setup section.
camera model and then under Wizard, click the link of the version (Windows or Mac)
you want to download. Depending on your web browser, you may need to right-click
mydlink Portal
Step 1:
the link and select Save link as. Once downloaded, do not launch the wizard until
Attach the power supply to the power input located on the back of the DCS-2132L
instructed.
After registering your DCS-2132L camera with mydlink, you wil be able to remotely
access your camera from the www.mydlink.com website. After signing in to your
and connect it to a wal outlet or power strip. Power is confirmed when the Power
LED is lit. Your Cloud Router wil automatical y assign your network settings (both
Step 2:
mydlink account, you wil see a screen similar to the fol owing:
wired and wireless) to your camera.
If you have a WPS-enabled router and want to connect your camera wirelessly to
your wireless network, do not connect the Ethernet cable and continue with Step 3.
Step 1:
Thank you for purchasing the DCS-2132L Cloud Camera 2200. Fol ow the easy
Open Internet Explorer and go to http://www.mydlink.com, then sign into mydlink.
Step 2:
steps in this guide to properly set up your camera. Please verify that al the package
If using an Ethernet connection: Connect the included Ethernet cable to the
Connect the included Ethernet cable to the Ethernet port located on the back of
contents below are available.
Ethernet port located on the back of the DCS-2132L and connect it to your router.
the DCS-2132L and attach it to your router. Skip to Step 7.
Step 2:
Select your camera from the device list, and your camera’s Live View wil appear.
Package Contents
If using a wireless connection: Press and hold the WPS button on the back of the
Step 3:
Attach the power supply to the power input located on the back of the DCS-2132L
camera for 5 seconds. The blue WPS status LED wil start to blink. Then, press the
and connect it to a wal outlet or power strip. Power is confirmed when the Power
WPS button on your Cloud Router within 2 minutes.
LED is lit.
DCS-2132L Cloud Camera 2200
Step 3:
Step 4:
From any computer, open a web browser, go to http://www.mydlink.com and log
Press and hold the WPS button on the back of the camera for 5 seconds. The blue
into your account. Once mydlink detects your camera, a notice wil appear that there
CAT5 Ethernet Cable
WPS status LED wil start to blink.
is a new device detected. Click on your camera from the New Devices list and then
click Yes to add your camera.
Step 5:
Press the WPS button on your wireless router within 2 minutes. On some routers,
Power Adapter
Your setup is complete!
you may need to log into the web interface and then click an on-screen button to
activate the WPS feature. Please refer to your router’s user manual if needed.
Technical Support
You can now unplug your camera and move it to the location of your choice.
Having trouble instal ing your new product? D-Link’s website contains the latest
If any of the above items are missing, please contact your reseller.
Step 6:
user documentation and software updates for D-Link products. U.S. and Canadian
Once the WPS LED stops blinking and the Power LED is green, skip to Step 8.
customers can contact D-Link Technical Support through our website or by phone.
Step 7:
United States
Canada
System Requirements
Attach the power supply to the power input located on the back of the DCS-2132L
Telephone: (877) 453-5465
Telephone: (800) 361-5265
and connect it to your wal outlet or power strip. Power is confirmed when the
• Computer with Microsoft Windows® 7, Vista®, or XP, Mac OS® X (10.5 or above)
Internet: http://support.dlink.com
Internet: http://support.dlink.ca
Power LED is lit.
• PC with 1.3GHz or above; at least 128MB RAM
Copyright ©2012 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries.
• Internet Explorer 7 or above, Firefox 3.5 or above, Safari 4 or above, Chrome 8
Step 8:
Other trademarks are the property of their respective owners. Maximum wireless signal rate derived from IEEE Standard 802.11g and
or above
802.11n specifications. Actual data throughput wil vary. Network conditions and environmental factors, including volume of network
Windows Users - Once the file is downloaded from Step 1, you wil have to extract
traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will
• Existing 10/100 Ethernet-based network or 802.11n/g wireless network
(unzip) the files. Right-click the file and select to extract the files. Once extracted,
adversely affect wireless signal range. Product specifications, size and shape are subject to change without notice, and actual product
appearance may differ from that depicted on the packaging. Visit dlink.com (US) or dlink.ca (Canada) for more details.
• A broadband Internet connection
double-click autorun.exe to launch the setup wizard.
Mac Users - Once downloaded, double-click the file to launch the setup wizard.
DCS-2132L
Version 1.1(US) | May 18, 2012