Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
to 25 min.) One DK-12 Active Infrared Sensor provides a 6’ x 4’ protection if a person or forklift stops in its pattern. BQj V'.V | > Presence DK-1E Detector for Automatic Doors Left Side Pattern Left Side Pattern (3’x4’) (4’x4') Single dip switch pattern selection allows the detector to adjust easily to any particular installation. B.E.A. Inc. 300 South Main Street Pittsburgh. PA 15215 USA Phone:412-782-5150 Fax:412-782-5154 Website: E-mail: sales@beainc.com Toll Free Numbers: US & Canada: 1-800-523-2462 PST: l-877-BEAWEST (232-9378) Mexico: 001-800-711-1398 a Detailed architectural specifications are available on BEA's website and in our architectural binder. Installation The DK-12 can be ceiling or wall mounted, with adjustable mounting angles. The DK-I2’s activation zone will cover to the floor when the sensor is mounted 10’ high. The 10’ high activation zone will be shifted higher as the sensor is mounted higher. The DK-12 is mounted in the center of the door opening and easily adapts to its surroundings. By a push of a button, the DK-12 scans and remembers the environment. The maximum presence detection (learn mode) can be adjusted from 30 sec. to 25 min. with a potentiometer. When exposed to inclement weather. BEA recommends the be installed with the weather protection hood (WHU). DK-12 DK-12 Detection Zone 6 Switchable Patterns* DK-12 and SuperScan Together Adjust for Maximum Safety I. Approach The Compact detects motion and signals the door to open. 3. During Operation The movement of the door triggers the DK-12. The LO-21 blocks the transfer of the signal and the door continues to open. 4. Coming From The Wrong Direction The SBK-111 beam detects the person and transmits the information to the LO-21. which prevents the door from reopening. 5. Protection With The Door Fully Open The DK-12 detects the child and prevents the door from closing. NOTE: If the door already has the DK-12 installed, or any other type of sensor, you can still enhance the safety of your door by adding the SuperScan system. The SuperScan is a door mounted sensor that will provide safety at all times, even when the door is in motion. See the technical sheet or catalog for details. Wide Pattern (6’x4') Right Side Pattern (3’x4’) 2. Protection Behind The Door The DK-12 mounted on the swing side of the door, detects the presence of a child, even if immo-bile.The DK-12 prevents the door from opening. Narrow Pattern (4'x4') Right Side Pattern (4’x4') TECHNICAL SPECIFICATIONS Mounting Height 1 O' for detection to the floor Temperature range -30° F to 131° F Detection Zone Full pattern 4' deep to 6' wide Immunity Immune to electrical and radio frequency interference Mounting Angle 20" - 26° - 32° Material Aluminum and ABS plastic Power Supply 12V to 24VAC/DC Housing Color Black (ready to paint) Frequency Consumption Output Max voltage at contacts Max current at contacts Max power supply Relay hold time Weight 50 to 60 Hz 100 mA min., 150 mA max. 60 V DO 125 V AC I A (RESISTOR) 30 W (DC). 120 VA (AC) I to 10 seconds I lb.. 11 oz. Unique and automatic push button adjustment for easy installation Adjustment of maximum presence detection from 30 seconds to 25 minutes with potentiometer Insensitive to ambient light Immune to electrical and radio frequency interference In cornblnation «»frh two other del* (motion detecto uftty beam) and * spécial log« control (1021 ».the OK-12 offen a complete detection syuem. Call BEA tor deuils...