Votos - 4, Puntuación media: 4.5
(
)
)
|
Resumen del manual
Each track is assigned a number. For example, the third track is Track 3. The same is true for Video CD/ SVCD discs. However, some discs are not divided into tracks. Audio CD or Video CD/SVCD Track 1 Track 2 Track 3 Track 4 JPEG/MP3 Disc (CD-R/RW/ROM) MP3/JPEG files put in directories nested in several levels on a disc will be organized as if they were put in single level directories (groups) by the MP3/JPEG Navigation of this unit. (Apg. 44) File structure of a disc before starting the MP3/JPEG Navigation Directory MP3 file JPEG file File structure of the disc after starting the MP3/JPEG Navigation Files are automatically grouped as follows and displayed on the MP3/JPEG Navigation screen. Data is displayed in the alphabetical order of file name. Files are grouped based on roots. . This unit can recognize up to 9 hierarchies including directories and files. Also, it can recognize up to 250 files in each group, and up to 99 groups on a disc. NOTES: . Video CD/SVCD discs that support Playback Control (PBC) The contents of a disc are recorded into several hierarchies, and played back according to the instructions on the screen while navigating through the hierarchies. It is also possible to playback recorded tracks consecutively without activating the PBC function even when playing a PBC-compatible disc. (Apg. 26) . Regarding the contents recorded on discs Some files may not be played back depending on the file types and other factors. DISC INFORMATION 10 EN DVD VIDEO Marks Sometimes marks are printed on a DVD disc and/or on its packaging to indicate information regarding the contents and functions of the disc. Check the marks indicating the contents and functions of the disc. Note, however, that in some cases a disc may not include a mark even for a function it supports. Marks related to video Number of subtitles Number of angles Recorded under the standard 4:3 aspect ratio Screen includes black bands at the top and the bottom of image which has a standard 4:3 aspect ratio (letter box) Video playback is in Wide video mode (16:9) on wide televisions, but in letter box on televisions with standard 4:3 aspect ratio. Video playback is in Wide video mode (16:9) on wide televisions, but pan and scan is used on televisions with standard 4:3 aspect ratio (either the left or right side of the image is cut-out). Marks related to audio Number of audio tracks Dolby Digital Stereo Creator mark Developed by Dolby Laboratories. It enables audio recording in high-quality stereo Dolby Digital. DTS (Digital Theater Systems) You can enjoy DTS audio if you connect an amplifier with a built-in DTS decoder to the DIGITAL OUT connector of the unit. Placing A Disc Opening the disc tray Press Mto open the disc tray. EJECTDV/HDD/DVDRECMODEINSTANTREPLAYAUDIODUB.INSERTRECDVDDVIN/OUTRECPAUSEPLAYFFREWSTOP . Pressing the button again closes the disc tray. . Use the button to open and close the disc tray. . Do not block the disc tray with your hand while it is opening or closing as this may result in hardware failure. . Do not place unplayable discs or any object other than a disc on the disc tray. . Do not press down strongly on the disc tray or place any heavy objects on it. Discs without cartridges PEN/CLOSE STOP PLAY REMAIN REC MODE SLOW < > REC PAUSE REW FF CH DV IN REC LINK DVD TIMER DVD DVD REC VCR DUBBING PULL-OPEN Disc tray Place the disc on the disc tray with the label side facing up. Since disc size changes depending on the disc to be played back, be sure to correctly align the disc with the grooves for its size. If the disc is not in its groove, it may be scratched or otherwise damaged. To insert an 8 cm disc, place it according to the inner groove. DVD-RAM discs contained in cartridges Double-sided discs: Remove the disc from the cartridge. Align the disc with the grooves on the disc tray as shown in the illustration and insert with the side you wish to play back or record facing down. If you insert the disc with ASide AB facing down, programs are recorded on the side A. Single-sided discs: Remove the disc from the cartridge. Align the disc with the grooves on the disc tray as shown in the illustration and insert with the label side facing up. DISC INFORMATION EN 11 Care And Handling Of Discs How to handle discs When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, they are easily damaged. If a disc gets dirty, dusty, scratched or warped, the images and sound will not be picked up correctly, and such a disc may cause the unit to malfunction. Label side Do not damage the label side, stick paper to or use any adhesives on its surface. Recording side Make sure that discs are not scratched or dirty on the recording side before use. Scratches and dirt on the recording side of a disc may hinder proper playback and recording. Also be careful that a DVD-RAM disc may get scratched or dirty when removed from cartridge then put back in after use. Storage Make sure that discs are kept in their cases. ...