Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
40 min. r \ Start recording press it again to stop Remaining space on the hard disk Picture Quality -|XP| [ 4 h 5 9 m ] a |XP| [4 h 5 9 m] •REC • II Recording Record-standby V .J When the recording is failed... Check the LCD monitor one more time. Did you select video mode? # Still image mode û when you slide the switch 2 ^ Did you select video recording mode? While recording While playing back The mode changes when you press the button © 2007 Victor Company of Japan, Limited M7H5 Printed in Japan 0707MNH-AL-VP LYT1789-004A r Back-Up Hi-Definition Images y L (Easy and correct way of copying to a DVD) 1 For customers using DVD Burner (sold separately) 1. Get ready a recommended disc Please use thejecommendedjdjscs stated below. Using discs other than those recommended may cause problem when copying to the DVD and when playing back the DVD. Recommended discs DVD-R DVD-RW DVD-R DL (single-sided double layer) Brand JVC JVC JVC TDK Verbatim Verbatim SONY • Only DVD-R and DVD-RW discs can be used. • Recording and playback may not function properly if the recording side is scratched or dirty. 2. Set up each device before copying DVD Burner (CU-VD40/CU-VD20) Œ Camera (GZ-HD3) Connect the USB cable provided with DVD Burner (CU-VD40/CU-VD20) Turn on the DVD Burner x--x After turning on the power, wait for approximately 20 seconds before proceeding to step [3 . The burner may not function properly within this 20 seconds. Turn on the camera (GZ-HD3) Insert a new recommended disc into the DVD Burner 3. Copy all images to the DVD Perform operations on the camera. i?) Confirm that the display on the right appears on the LCD screen of the camera (GZ-HD3) Select “NORMAL BACK-UP” © Select- (move up and down) f > Confirm (press down) Select “ALL” © Select (move up and down) (2) Confirm (press down) Select “EXECUTE AND FINALIZE” © Select- (move up and down) [ Confirm (press down) IMPORTANT Playback is not possible if the disc is not finalized. Wait for the “copy in progress” screen on the right and the “hourglass” mark to disappear, then turn off the power and disconnect the USB cable. Exit Confirm (press down) (Camera's LCD screen display) fl9 FINALIZE ® SELECT BACK-UP ¿9 PLAYBACK •»SELECT •«> SET ■ DVD 1 1 DVD(DL) 1 EXECUTE I EXECUTE AND FINALIZE~| CANCEL •»SELECT ♦ SET menu:T0P “Copy in progress” screen ALL ® NOW CREATING > ELAPSED TIME: 1m50s 40* Copying completed! Next, operate the camera (GZ-HD3). Proceed to step 3. ^ • There are other ways of copying which includes copying only the desired files. For details, refer to the instruction manual of the camera (GZ-HD3)....