Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
If the appliance is running under a week program, this is indicated on the display by the PROGtext on the first line (see the figure). The second line shows the time of day, the day of the week and the temperature. The third line shows the next switching time of the week program and the programmed temperature. The fourth line shows the PROGRAM ACTIVATEDtext. PROG 07:55 Monday 64EC MO 08:00 Tset 75EC PROGRAM ACTIVATED Instruction manual BFC 11 Main menu gis The appliance's default week program switches the appliance on every day at 00:00 and off at 23:59. The default water temperature setting is 65°C. If you want, you can change every setting in the appliance's standard week program. If the water temperature becomes too low while the week program is running, the appliance will run through the heating cycle (9.3 "The appliance's heating cycle") and return to the week program. This following are discussed: • Starting and stopping the week program • Changing the appliance's standard week program • Adding times to a week program • Deleting times from a week program 11.5 Starting and stopping the week program The week program can be started up from any other operating mode, as follows: 1. : WEEK PROGRAM | START OPERATION Confirm with . A week program can be shut down simply by activating a different operating mode, for example the "ON mode". 11.6 Changing the appliance's standard week program Note First fill-in the desired week program on the supplied week program card. A week program is made up of a number of programmable periods in which you can have the appliance switch on and off. A period consists of: • switch-on time: day of the week, hours and minutes: • switch-off time: hours and minutes; • the water temperature setting; • on/off setting for a program-controlled pump. Note The switch-off time must always be followed by a switch-off time on the same day of the week. A maximum of three periods may be programmed per day. You can program a maximum of 21 periods. Call up the menu for the week program as follows: • : WEEK PROGRAM| PROGRAM OVERVIEW. Confirm with . WEEK PROGRAM START OPERATION ^»PROGRAM OVERVIEW E The display shows the menu for the week program, see the figure below. With the default setting, the program switches on and off every day at 00:00 and 23:59 hours respectively, the water temperature is 65°C and the pump is switched on (P). DAY TIME Tset ON »SU 00:00 65EC P OFF SU 23:59 ON MO 00:00 65EC P OFF MO 23:59 ON TU 00:00 65EC P OFF TU 23:59 ON WE 00:00 65EC P OFF WE 23:59 ON TH 00:00 65EC P OFF TH 23:59 ON FR 00:00 65EC P OFF FR 23:59 ON SA 00:00 65EC P OFF SA 23:59 INSERT DELETE START OPERATION Example As an example, we will set the switch-on time for Sunday to 08:15 hours, and the matching switch-off time to 12:45 hours. The water temperature will be set to 75 °C and the pump will run continuously. The following settings are entered one by one via the menu: the switch-on time, the switch-off time, the desired water temperature, and the mode of the program-controlled pump. 11.6.1 Week program: setting the switch- on time 1. Bring the cursor to SU Confirm with . ON »SU 00:00 OFF SU 23:59 Tset 65EC PUMP ON SAVE The day indicated by » flashes. 2. Use and to set the desired day. In the example this is SU(Sunday). Confirm with . ON SU»00:00 OFF SU 00:59 Tset 65EC PUMP ON SAVE The cursor moves to the hour digits, which flash. 3. Use and to set the hours. In the example, this is 08. Instruction manual BFC gis Confirm with . The cursor moves to the minute digits, which flash. ON SU 08»00 OFF SU 08:00 Tset 65EC PUMP ON SAVE Note Because the switch-off time can never be earlier than the switch-on time, the switch-off time setting is automatically adjusted with the switch-on time. 4. Use and to set the minutes. In the example, this is 15. Confirm with . The cursor moves to the switch-off hour digits, which flash. ON SU 08:15 OFF SU»08:15 Tset 65EC PUMP ON SAVE 11.6.2 Week program: setting the switch- off time 1. Use and to set the hours. In the example, this is 12. Confirm with . The cursor moves to the minute digits, which flash. ON SU 08:15 OFF SU 12»15 Tset 65EC PUMP ON SAVE 2. Use and to set the minutes. In the example, this is 45. Confirm with . The cursor moves to the desired water temperature. ON SU 08:15 OFF SU 12:45 Tset»65EC PUMP ON SAVE 11.6.3 Week program: setting the water temperature 1. Use and to set the water temperature. In the example this is 75°C. Confirm with . The cursor moves to PUMP ON 11.6.4 Week program: setting the program- controlled pump 1. If required, a pump can be controlled during the period. Use and to set PUMP ON . The pump ensures a regular circulation of hot water in the hot water pipes. You can skip this step if you there is no pump in your hot water circuit. Confirm with . The cursor moves to SAVE. ON SU 08:15 OFF SU 12:45 Tset 75EC PUMP»ON SAVE DAY TIME Tset ON »SU 08:15 75EC P OFF SU 12:45 ON MO 00:00 65EC P OFF MO 23:59 ON TU 00:00 65EC P OFF TU 23:59 2. Confirm w...
Otros modelos de este manual:Calentadores de Agua - cyclone BFC -100 (3.89 mb)