Votos - 4, Puntuación media: 4 ( )

Fabricar: IDEAL INDUSTRIES Tamaño del archivo: 194.78 kb Nombre del archivo: Idioma del manual:

· Check the room thermostat is set at the required temperature – Test the room thermostat by turning fully up – If this does not respond contact your installer · Check the radiator temperature control (C) is set at the winter setting for central heating. The nature of all combination boilers is to heat up water directly from the incoming mains water supply directly through the boiler to supply domestic hot water at the stated flow rates, (as shown in the boiler installation instructions), to achieve a 35°C temperature rise. As the ambient temperature of the cold main varies during the summer and winter months it is likely in the colder winter months that the flow rate will need to be reduced at the outlet taps to achieve the same temperatures achieved in the warmer summer months. This is not a fault with the appliance but is relevant to the varying temperature of the incoming cold mains water supply. Mini S Only Operating for hot water but will not operate for central heating · If fitted with an external programmer check that the central heating channel is set at an ‘on’ period – If it still does not operate contact your installer. · Check the room thermostat is set at the required temperature – Test the room thermostat by turning fully up – If this does not respond contact your installer Operating for central heating but will not operate for hot water · If fitted with an external programmer check that the domestic hot water channel is set at an ‘on’ period – If it still does not operate contact your installer. · Check the cylinder thermostat is set at the required temperature – Test the cylinder thermostat by turning fully up – If this does not respond contact your installer Ideal Consumer Helpline Tel: 01482 498660 Ideal Boilers, P.O. Box 103, National Ave, Kingston Upon Hull, HU5 4JN. Tel. 01482 492251 Fax. 01482 448858. Registration No. London 322 137. Caradon Ideal Limited pursues a policy of continuing improvement in the design and performance of its products. The right is therefore reserved to vary specification without notice. ...

Descargar ahora

Introduzca dos números de la imagen: