Votos - 1, Puntuación media: 3
(
)
)
|
Resumen del manual
System removes scale reducing minerals regardless of the GPG Choose a mounting location suitable to support the full weight of the system when operating Mount system convenient to the post water softener supply line and for routing the outlet and drain lines The tank assemby may be mounted above, below or alongside (preferred) of the water processor assembly Install vertically with cartridges hanging down. Allow 2-1/2" clearance below the cartridge for easy cartridge replacement The water inlet must supply a minimum of 0.5 gpm at 50-85 psi on a consistent basis Deliming of equipment prior to application is recommended Replace the 4CB5-MR carbon filter every 12 months. Change the 4MR-1 mineral reduction cartridge every two years, or as needed Cartridge replacement schedules assume the system is installed on softened water Outlet Water Production: 25 gal. per day (54.5L) @ 50 psig (340 kPa), 77°F (25°C) per NSF Standard 58 testing. Water production depends on supply water pressure and temperature Wastewater Production: 74 gal. per day (289L) @ 50 psig (340 kPa), 77°F (25°C). Wastewater drain line capacity: 3 gpm (21 Lpm) to open atmosphere Storage Tank Capacity: 3 gallon tank; effective/ usable capacity: 2.5 gal. (9.5L) Mineral Reduction System for foodservice applications Ideal for: Flash steamers, conventional steamers, cheese melters, combi-ovens and coffee/espresso machines Uniquely designed for low volume applications (approximately 25 gpd nominal consumption) EV9797-91 MRS-20 System: EV9797-91 4CB5 cartridge: EV9617-11 MR-20 Cartridge: EV9273-69 BENEFITSMR S -20 APPLICATION/SIZINGINSTALLATIONTIPSOPERATIONTIPSComplete Mineral Reduction Water Processing System Improves equipment life and performance by removing at least 90%+ of all dissolved solids that cause scale build-up Protects against taste and odor causing contaminants while removing dirt, particulates and dissolved minerals Less frequent deliming of equipment means reduced maintenance and service costs Sanitary cartridge replacement is simple, quick and clean. Internal filter parts are never exposed to handling or contamination Two-part design makes installation flexible, and small footprint easily fits in any kitchen Easy to operate system has no moving parts and requires no electrical power System includes mineral reduction processor, carbon filter cartidge, reverse osmosis cartridge, and storage tank No monitoring of grains per gallons is necessary. System removes scale reducing minerals regardless of the GPG Choose a mounting location suitable to support the full weight of the system when operating Mount system convenient to the post water softener supply line and for routing the outlet and drain lines The tank assemby may be mounted above, below or alongside (preferred) of the water processor assembly Install vertically with cartridges hanging down. Allow 2-1/2" clearance below the cartridge for easy cartridge replacement The water inlet must supply a minimum of 0.5 gpm at 50-85 psi on a consistent basis Deliming of equipment prior to application is recommended Replace the 4CB5-MR carbon filter every 12 months. Change the 4MR-1 mineral reduction cartridge every two years, or as needed Cartridge replacement schedules assume the system is installed on softened water Outlet Water Production: 25 gal. per day (54.5L) @ 50 psig (340 kPa), 77°F (25°C) per NSF Standard 58 testing. Water production depends on supply water pressure and temperature Wastewater Production: 74 gal. per day (289L) @ 50 psig (340 kPa), 77°F (25°C). Wastewater drain line capacity: 3 gpm (21 Lpm) to open atmosphere Storage Tank Capacity: 3 gallon tank; effective/ usable capacity: 2.5 gal. (9.5L) Mineral Reduction System for foodservice applications Ideal for: Flash steamers, conventional steamers, cheese melters, combi-ovens and coffee/espresso machines Uniquely designed for low volume applications (approximately 25 gpd nominal consumption) EV9797-91 MRS-20 System: EV9797-91 4CB5 cartridge: EV9617-11 MR-20 Cartridge: EV9273-69 27" 22.5" 25" 22.5" OUTLET 3/8" FNPT INLET 3/8" FNPT MR S - 2 0 Overall Dimensions: Processor - 25”H x 22.5"”W x 5”D Tank - 27”H x 22.5"”W x 11.25”D Inlet and Outlet connection: 3/8” OD John Guest tubing fitting (provided) 3/8" ID beverage hose Wastewater line and Sample port connection: 1/4" OD John Guest tubing fitting (provided) Steamer manifold connection: 1/4" quick connect on tubing coil (provided) Steamer feed hose connection: 3/8" barb on tubing coil (provided) Pressure Requirements: 10 psi -125 psi (0.7 – 8.6 bar), non-shock Water Supply: 0.5 gpm (1.9L) @ 50-85 psi (280-595 Kpa) Inlet Temperature: 40°F - 100°F (4-38°C) Inlet TDS: 1,500 ppm max recommended Operating Weight: 50 lbs. The contaminants or other substances removed or reduced by this drinking water system are not necessarily in your water. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certi...