Votos - 2, Puntuación media: 3 ( )

Fabricar: Holmes Tamaño del archivo: 356.86 kb Nombre del archivo: Idioma del manual:

• Exclusive Holmes HEPA filter system removes 99.97% of all airborne particulate as small as 0.3 microns from air passing through the filter. • The No Escape VaccuumSeal™ helps reduce air bypass and ensure maximum clean air delivery, by sealing the filter against the main housing. • A powerful turbo fan system, operated by a rugged, long life GE motor, quietly pulls the air in through the front inlet grill. • Polluted room air passes through a carbon odor filter that removes larger airborne particles such as lint, dust and pollen and also helps filter out odors. Next the air continues through a pleated long life HEPA filter. This filter removes particles as small as 0.3 microns filtering dust, pollen, smoke, mold spores and pet dander. • The purified air is then returned to the room through the top grill. The upward movement of the filtered air promotes efficient room circulation without unpleasant drafts. Figure 1 To Remove Filter: 1. Grasp filter from tab (A) on top front of the filter. 2. Lifting upward, swing bottom of the filter towards you. Tab A Cord and Plug Installation Safety Instructions The length of cord used on this appliance was selected to reduce the hazards of becoming tangled in, or tripping over a longer cord. If a longer cord is necessary an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the rating of the air purifier. Care must be taken to arrange the extension cord so that it will not drape over the countertop or tabletop where it can be pulled on by children or accidentally tripped over. Figure 3 A B C D E J F G Front Grill Side Latch Carbon Odor Filter No Escape HEPA Filter Tab “A” Main Housing Power Knob Battery Cover (If Applicable) LCD Display (If Applicable) Top Grill (If Applicable) A. B. C. D. E. F. G. H. I. J. I Filter Check tracks the accumulated time your air purifier has been in use. When the timer has reached 8000 hours on your LCD Display, it is time to check your filter. 1. Turn off and unplug the Air Purifier. 2. the front grill by lifting up the side latches and pulling the front grill toward you. 3. Check the carbon filter for any looseness or a noticeable amount of dirt or lint. Pull back the carbon filter to expose the HEPA filter. Match the color of the pleated HEPA filter to the colors shown on the Filter Condition Indicator label. If the filter has changed from white to a dark gray or brown color, it is time to replace the filter (Please refer to Filter Replacement Instructions). 4. If you have changed the filter it is important to reset the LCD Filter Check. Using a thin small object (such as a paper clip or pen tip) to insert in reset hole, press once to reset the display to again show "0000". The bottom of the display will have a flashing clock. This indicates that filter check is working properly. Please note that the RESET button will operate only after the display has reached 8000 hours. If reset button is pressed before 8000 hour...

Descargar ahora

Introduzca dos números de la imagen: