Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
3. Before using the air purifier, extend the cord and inspect for any signs of damage. DO NOT use the product if the cord has been damaged. 4. This product has a polarized plug (one blade is wider than the other) as a safety feature. This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If the plug still does not fit, contact a qualified electrician. DO NOT attempt to defeat or override this safety feature. 5. ALWAYS UNPLUG the air purifier while it is being cleaned. 6. DO NOT move or tilt the air purifier while it is in operation. Turn off and unplug before moving. 7. DO NOT immerse the air purifier in water at any time because permanent damage will occur. To properly clean your air purifier, follow the instructions in the Maintenance section of this manual (pg. 9). READ AND SAVE ALL INSTRUCTIONS. Introduction Thank you for purchasing the QuietFlo® HEPA Air Purifier from Hunter Fan Company. You have purchased our latest development in portable air purification which has been designed to improve the quality of the air that you breathe. The following innovative features are included in your Hunter Air Purifier. • High Particulate Efficiency: The HEPA filter will remove 99.97% of 0.3 micron particles from the air that passes through the filter. • Odor Removal: The activated carbon pre-filter helps remove odors such as cooking, smoke, and pet smells from the air. It also traps lint, hair, and other large particles to help extend the life and performance of the HEPA filter. • Quiet: The air purifier has been designed to operate quietly and efficiently. You can choose among three speeds to best meet your needs at different times. •Filter Counters: Filter maintenance is critical to the performance of the air purifier. To help you determine when to change the filters, the pre-filter and HEPA filter, the unit has built in life counters that keep track of the life remaining of each filter. 3 41726-01 41726-01_final.pmd 3 8/13/04, 5:04 PM Description of Air Filtration System How the QuietFlo® HEPA Air Purifier System Works As the air is pulled into the purifier, the activated carbon pre-filter absorbs odors and catches large particles. Then, the air travels through the HEPA filter where the smaller particles are collected. Finally, the clean purified air is released back into the room. Dust & Irritants Pollen & Allergens Odors Bacteria Pet Hair & Dander Carbon True HEPA Filter Pre-Filter 99.97% – .3 Microns Fig. 1 - Illustration of the Air Filtration System Air Purifier Components HEPA FILTER PRE-FILTER FRONT GRILL TABS FOR OPENING THE FRONT GRILL ................................................................................................................................................................................ Fig. 2 - Air Purifier Components HOOK TAPE GRILL VENTS HOOK TAPE Fig. 3 - Inside Surface of Front Grill 41726-01 4 41726-01_final.pmd 4 8/13/04, 5:04 PM Description of Air Filtration System Display and Control Keys The display and control keys allow for easy operation of the air purifier. UP/DOWN KEYS: Adjusts the blower speed and turns the unit on and off. PRE-FILTER RESET: Resets the Carbon Pre-Filter Life Counter. FILTER RESET: Resets the HEPA Filter Life Counter. Fig. 4 - Air Purifier Control Area HEPA FILTER LIFE COUNTER ANIMATED BLOWER KEYPAD LOCKED INDICATOR BLOWER SPEED CARBON PRE-FILTER INDICATOR HEPA FILTER INDICATOR PRE-FILTER LIFE COUNTER Fig. 5 - Alpha-numeric Display 5 41726-01 41726-01_final.pmd 5 8/13/04, 5:04 PM Operation Initial Operation This section provides basic instructions on the use of your air purifier. After following these initial directions, please continue reading this booklet to learn how to operate the more advanced features of your air purifier. Basic Operation of the Air Purifier: 1. Take the air purifier out of the box and remove the clear plastic protective bag. Place the unit on a firm level floor. 2. Before turning on the air purifier, you need to confirm that the filters are firmly in place and have not become loose during shipping. To check the filters, first open the front grill. Release the front grill by placing your fingers behind the tabs and pulling forward. Refer to Fig. 2 (pg. 4). 3. Next, check the HEPA filter by pressing firmly on all four corners of the filter to ensure that it is fully inserted into the filter opening. 4. The carbon pre-filter is mounted inside the front grill with hook tape. Confirm that it properly covers the grill vents. You may notice a few black particles coming off the pre-filter. Those particles are part of the odor-removing activated carbon and will be collected on the filter during use. 5. Place the front grill back onto the unit. First, line up the tabs on the bottom of the grill with the openings on the purifier base and then push the top of the grill forward until it is closed. NOTE: This unit will not operate unless the grill is in the correct position...