Votos - 3, Puntuación media: 4.7
(
)
)
|
Resumen del manual
41663-01 9/19/2003 © 2003 Hunter Fan Company Using the Ionizer Using the Ionizer leased into the air and positively charged dust, smoke, and pollen particles are attracted to the negative ions. These particles settle out of the air and can be vacuumed up during normal cleaning. These particles are also more easily captured by the HEPAtech™ filter as they pass through the HEPAtech™ Air Purification System. To ensure the best air circulation in the room, we recommend that you place your air purifier six inches away from any walls. Using Your Air Purifier 1. Remove your air purifier from the box and take it out of the clear plastic protective bag. 2. Place your HEPAtech™ Air Purification System on a firm, flat surface. 3. Before turning the Air Purifier ‘on’, you need to open the front grill. For Models 30057 & 30251: To release the front grill, place your fingers behind the tabs and pull forward. For Models 30067 & 30124: To release the front grill, press the buttons on the side until the front grill slides easily over the buttons. 4. The filter will be installed in the correct position. Grasp the filter and pull it forward. Remove the plastic wrapping and replace the filter in the unit. The white filter material should be facing outward (towards you) and the wire mesh side should be hidden from view (inside the unit). 5. Replace the front grill. Be sure that the bottom tabs are in location first, and then push the top of the grill forward until it is closed. The unit is now ready for normal operation. Note: This unit will not operate unless the door is placed in the correct position. 6. Plug the unit into a 120V electrical outlet. © 2003 Hunter Fan Company 41663-01 9/19/2003 4 41663-01 9/19/2003 © 2003 Hunter Fan Company Front Grill Pre-filter HEPAtech Filter Tabs for opening the front grill Buttons for opening the front grill Front Grill Pre-filter HEPAtech Filter Figure 1 - Models 30057 & 30251 Figure 2 - Models 30067 & 30124 Operating Your Air Purifier Operating Your Air Purifier green light near the button will be illuminated. On/Speed Control: Rotate the Speed Control knob to set the desired speed. A setting of zero (0) indicates that the unit is off, one (1) is low speed, two (2) is medium speed, and three (3) is high speed. The fan speed can be adjusted at any time. Filter Change Calendar: The filter counter is designed to optimize the performance of the air purifer by reminding you when to change the HEPAtech Filter and pre-filter. HEPAtech Filter Calendar: The HEPAtech Filter indicator is located at the top of the calendar ring. To set the HEPAtech Filter counter, rotate the calendar ring to align the month that you installed the filter with the top indicator. Since the filter is designed for 6 months use, the two indicators will serve as reminders to change the filter every 6 months. Pre-filter Calendar: The inner knob of the filter counter is the pre-filter counter. To use, align the knob with the month that you installed the pre-filter...
Otros modelos de este manual:Aire - 30057 (681.42 kb)
Aire - 30124 (681.42 kb)
Aire - 30067 (681.42 kb)