Votos - 2, Puntuación media: 3.5 ( )

Fabricar: Carrier Tamaño del archivo: 446.06 kb Nombre del archivo: 40rm-9si.pdf Idioma del manual:

(mm) 1...381 1...381 1...381 2...381 2...381 2...381 2...457 2...457 Nominal Airflow (L/s) 1416 1605 1888 2360 2831 3775 4719 5663 Airflow Range (L/s) 10621770 12042006 14162360 17702949 21243539 28314719 35395899 42477079 Nominal Motor kW (Standard Motor) 208/230-1-60 1.79 1.79 — — — — — — 208/230-3-60, 460-3-60 1.79 1.79 1.79 1.79 2.76 3.73 5.60 7.46 575-3-60 1.49 1.49 1.49 1.49 2.24 3.73 5.60 7.46 230-3-50, 400-3-50 1.79 1.79 2.16 2.16 2.16 3.73 5.60 7.46 Motor Speed (r/s) 208/230-1-60 28.8 28.8 — — — — — — 208/230-3-60, 460-3-60 28.8 28.8 28.8 28.8 28.8 29.1 29.1 29.1 575-3-60 28.8 28.8 28.8 28.8 28.8 29.1 29.3 29.3 230-3-50, 400-3-50 23.8 23.8 23.8 23.8 23.8 23.8 23.8 23.8 CHILLED WATER COIL Max Working Pressure (kPag) 2999 Face Area (sq m) — Upper 0.77 0.84 0.91 0.77 0.77 1.02 1.15 1.44 Face Area (sq m) — Lower — — — 0.51 0.77 0.77 1.15 1.15 Rows...Fins/m 3...591 3...591 3...591 3...591 3...591 3...591 3...591 3...591 STEAM COIL Max Working Pressure (kPag at 204.4 C) 1207 Total Face Area (sq m) 0.62 0.62 0.62 1.24 1.24 1.24 1.39 1.39 Rows...Fins/m 1...355 1...355 1...355 1...355 1...394 1...394 1...394 1...394 HOT WATER COIL Max Working Pressure (kPag) 1034 Total Face Area (sq m) 0.62 0.62 0.62 1.24 1.24 1.24 1.39 1.39 Rows...Fins/m Water Volume 2...335 2...335 2...335 2...335 2...335 2...335 2...493 2...493 (L) 31.4 52.6 54.1 (m3) 0.031 0.052 0.054 PIPING CONNECTIONS, Quantity...Size (in.) Chilled Water — In Chilled Water — Out Steam Coil, In (MPT) Steam Coil, Out (MPT) Hot Water Coil, In (MPT) Hot Water Coil, Out (MPT) Condensate (PVC) 1...13.8 ODF 1...13.8 ODF 2...13.8 ODF 2...13.8 ODM 2...13.8 ODM 2...13.8 ODM 2...21.8 ODM 2...21.8 ODM 1...13.8 ODF 1...13.8 ODF 2...13.8 ODF 2...13.8 ODM 2...13.8 ODM 2...13.8 ODM 2...21.8 ODM 2...21.8 ODM 1...21.2 1...21.2 1...11.2 1...11.2 1...11.2 1...11.2 1...2 1...11.2 1...11.2 1...2 1...11.4 ODM/1 IDF FILTERS Quantity...Size (mm) Access Location Throwaway — Factory Supplied 4...406 x 610 x 51 4...406 x 508 x 51 4...406 x 610 x 51 4...508 x 610 x 51 4...508 x 635 x 51 Either Side 7 TXV — Thermostatic Expansion Valve NOTES: 1. Dimensions in [ ] are in millimeters. 2. Direction of airflow. 3. Recommended clearance: • Rear: 3 in. (76 mm ) • Front: 2 ft, 6 in. (762 mm) • Right Side: 2 ft, 6 in. (762 mm) • Left Side: 2 ft, 6 in. (762 mm) • Local codes or jurisdiction may prevail. 4. Liquid piping not supplied by Carrier. 5. Duct flange is factory supplied and field installed. 6. 40RMS units may require alternate or additional field-fabricated piping access holes. UNIT UNIT WEIGHT lb (kg) 40RM007 381 (173) 40RM008 385 (175) 40RM012 405 (184) 40RMQ008 385 (175) 40RMQ012 427 (194) 40RMS008 390 (177) 40RMS010 391 (177) 40RMS012 391 (177) Fig. 1A — Dimensions — Sizes 007-012 8 TXV — Thermostatic Expansion Valve NOTES: 1. Dimensions in [ ] are in millimeters. 2. Direction of airflow. 3. Recommended clearance: • Rear: 3 in. (76 mm) • Front: 2 ft, 6 in. (762 mm) • Right Side: 2 ft, 6 in. (762 mm) • Left Side: 2 ft, 6 in. (762 mm) • Local codes or jurisdiction may prevail. 4. Liquid piping not supplied by Carrier. 5. Duct flange is factory supplied and field installed. 6. 40RMQ016 and 40RMS units may require alternate or additional field-fabricated piping access holes. UNIT UNIT WEIGHT lb (kg) 40RM014 670 (304) 40RM016 685 (311) 40RM024 690 (313) 40RMQ016 713 (323) 40RMS014 661 (300) 40RMS016 677 (307) 40RMS024 683 (310) Fig. 1B — Dimensions — Sizes 014-024 9 Fig. 1C — Dimensions — Sizes 028,034 10 UNIT WEIGHT UNIT lb (kg) 40RM028 1020 (463) 40RM034 1030 (467) 40RMS028 1035 (469) 40RMS034 1042 (473) TXV — Thermostatic Expansion Valve NOTES: 1. Dimensions in [ ] are in millimeters. 2. Direction of airflow. 3. Recommended clearance: • Rear: 3 in. (76 mm) • Front: 2 ft, 6 in. (762 mm) • Right Side: 2 ft, 6 in. (762 mm) • Left Side: 2 ft, 6 in. (762 mm) • Local codes or jurisdiction may prevail. 4. Liquid piping not supplied by Carrier. 5. Duct flange is factory supplied and field installed. 6. 40RMS units may require alternate or additional field-fabricated piping access holes. *YC and WD option codes for all 034 size units and 008, 010 units with 208/230-1-60 power designate standard motor and high-static drive. NOTE: See the following table for the sizes available for each unit. UNIT 007 008 010 012 014 016 024 028 034 40RM X X X X X X X X 40RMQ X X X 40RMS X X X X X X X X Fig. 2 — Model Number Nomenclature Unit Positioning — The unit can be mounted on the floor for vertical application with return air entering the face of the unit and supply air discharging vertically through the top of the unit. The unit can also be applied in a horizontal arrangement with return air entering horizontally and the supply air discharging horizontally. When applying the unit in a horizontal arrangement, ensure the condensate drain pan is located at the bottom center of the unit for adequate condensate disposal. See Fig. 3 for condensate connections for each unit position. Typical positioning a...

Descargar ahora

Introduzca dos números de la imagen: