Votos - , Puntuación media: ( )

Manual de usuario Precisionaire, modelo AC4054

Fabricar: Precisionaire
Tamaño del archivo: 1.08 mb
Nombre del archivo: ac4052_00_dfu_ron.pdf

Idioma del manual:

El documento se está cargando, por favor, espere

Descargar ahoraCerca

El documento se está cargando, por favor, espere

Descargar ahoraCerca

4) Remove all packaging material from the zeolite gas filter and slide the filter into the appliance. (Fig. 5) You can only insert the zeolite gas filter after you have removed the particle filter. , 1 5 6 To insert the ESP particle filter, slide it into the appliance (‘click’) (Fig. 6). To reattach the front panel, insert the bottom edge first (1) and then press the top parthome (2) (Fig. 7). Using the appliance AC4064/AC4054 1 Put the plug in the wall socket The standby light goes on (Fig. 8). , Press the function selection button one or more times to select the required function andsetting (Fig. 9). The corresponding light goes on and the standby light goes out. SmartAir Control: the built-in air sensor determines the ambient air quality and automatically , selects the most appropriate speed. In the first few minutes after you select the SmartAirControl function, the air quality indicator flashes red to indicate that the air quality sensor ismeasuring the ambient air quality.After approximately 5 minutes,the air quality indicator lights up green if the air quality is good or lights up red if the air quality is poor (Fig. 10). BoostPower: the appliance operates at high speed for 30 minutes (BoostPower light is on) , and then automatically switches to Smart Air Control (BoostPower light goes out and SmartAir Control light goes on) (Fig. 11). Speed: the appliance operates at the speed you select. , -e = low speed -e= medium speed -i= high speed 1 To stop the appliance from operating, press the function selection button until the standby light goes on (Fig. 12). Unplug the appliance. timer function Put the plug in the wall socket and select the required function and setting as described above. English Press the timer button to set the operating time (1, 4 or 8 hours) (Fig. 13). The corresponding timer light goes on. To deactivate the timer function, press the timer button and keep it pressed until the timer , light goes out. When the set time has elapsed, the appliance automatically switches to standby mode. , Note: If you want to stop the air cleaning process before the set time has elapsed, press the function selection button until the standby light goes on. AC4062/AC4052 1 Put the plug in the wall socket Press the on/off button to switch on the appliance. (Fig. 14) Set the speed slide to the desired speed: low, medium or high (Fig. 15). -e = low speed -e= medium speed -i= high speed The corresponding speed light goes on. , Press the on/off button to switch off the appliance and unplug the appliance. Cleaning and maintenance Always unplug the appliance before you clean it. Do not let water or any other liquid or flammable detergent enter the appliance to avoid electricshock and/or a fire hazard. Do not clean the appliance with water or any other liquid or a (flammable) detergent to avoidelectric shock and/or a fire hazard. Body of the appliance Regularly clean the inside and outside of the body to prevent dust from collecting on the inside and outside. 1 Wipe away dust with a dry, soft cloth from the body of the appliance. Clean the air inlet and the air outlet with a dry soft cloth. Corona particle charger Never touch the corona particle charger with your fingers.Always clean the corona particle charger with the special soft cleaning brush, which is stored in the front panel. Be extra care...