Votos - 5, Puntuación media: 4
(
)
)
|
Resumen del manual
Advanced PureAir TM Newport 9000 Owner’s Manual SAFETY OPERATION Please exercise caution when using the Newport 9000 or any other electrical device! This manual describes the safety precautions which should be observed in relation to your air purifier. Please review carefully BEFORE using the product. SPECIAL ATTENTION The voltage rating for air purifiers sold in the To prevent the possibility of electrical shock USA, Japan and Canada is AC100-120V, or short-circuiting your air purifier, Do NOT RATED 50/60Hz and in Europe is AC 230V, 50Hz. KEEP AWAY place the unit in or near the shower, bathtub VOLTAGE FROM WATER Using the wrong current may result in unit or other places where water seep into and damage, electrical shock or fire. damage the unit. Do NOT attempt to dismantle, repair or Do NOT operate your air purifier while it’s modify this device on your own. Doing so covered with fabric, plastic or other materials. DO NOT could result in electrical shock or damage to DON’T This can obstruct air flow, damage the unit DISMANTLE COVER the unit. In the event of malfunction, contact and may pose a fire hazard. an authorized maintenance facility. Do NOT operate your air purifier in places To avoid distortion or interference, your air where flammable, explosive or otherwise purifier should be placed at least three (3) AVOID HEAT combustible materials are stored. AVOID feet from computers, televisions and radios. SOURCES DISTORTION Do NOT place the unit in direct sunlight or For safety reason and to avoid the risk of near lit fireplaces, furnaces, ovens or other electrical shock and/or fire, unplug your air AVOID high temperature objects. Doing so can WHEN TO purifier from the electrical outlet under each DIRECT UNPLUG damage the air purifier and may pose a fire of the following conditions SUNLIGHT hazard. Avoid operating the unit when the • When cleaning or servicing the air purifier air temperature exceeds 104 F/40 C. or replacing filters. Do NOT place foreign objects in air purifier • When you will not be using your air purifier which can damage the unit or result in for an extended time period. DO NOT electrical shock. To avoid machine damage, TAMPER injury and accidents, Do Not allow children to • When moving the unit from one location to touch or play with this device. another. If the electric cord is damaged in any way, it must be replaced by the manufacturer or a qualified service center. NEVER operate a unit with a damaged electric cord. Doing so presents a serious risk of DAMAGED fire and/or electrical shock. CORD WARNING: The Newport 9000 is equipped with a polarized plug, i.e., one blade is WideBladeWideSlotwider than the other. The polarized plug is a safety device to reduce the risk of fire, shock and personal injury and is intended for use in a polarized outlet. The plug will fit only one way in a polarized outlet. Insert the wide blade of the plug into the wide slot of the outlet. If the plug does not fully fit into the outlet, reverse the plug. Never force the plug into any socket or try to defeat this important safety feature in any way. If it still does not fit contact a qualified electrician. Do not remove, replace, repair or in any way tamper with the original plug supplied with this unit. 1 Advanced PureAir TM Newport 9000 Owner’s Manual CONTROLS & AIR FLOW VENTS Front Face Plate AirOutletAirInletsBottomStandFrontPanelReleaseTabs Dust Sensor Air Inlets Soft Touch Control Panel Remote Control Odor Sensor FLOWAUTOON/OFFTIMERIONUV 2 Advanced PureAir TM Newport 9000 Owner’s Manual MAJOR COMPONENTS Back View Exploded Parts View 3 Advanced PureAir TM Newport 9000 Owner’s Manual BEFORE USE Pre-Installation Air Ventilation Open Windows for Air Ventilation Before plugging in the unit, please open the windows in the area where you will be using the unit. Ventilate the area for 2-3 hours if possible. Once the area has been ventilated, close the windows and plug in the unit. After plugging in, the unit sensor will sample the air and retain a memory of the existing indoor air condition. (The existing indoor air condition will be input as "CleanAir"). Once started, the odor indicator will blink as it memorizes the existing fresh air condition. After two minutes, the indicator will stop blinking to indicate the end of memorization. Please Note: Whenever the unit is unplugged, all memorized content will be erased. If the unit is turned on two minutes after plugging it in, the odor sensor indicator will not blink. When smoke, cosmetics, or any spray that contains alcohol is present, please ventilate and freshen the air before closing windows. Sometimes the sensor is not as sensitive when first purchased or after being unplugged for over a week. Its sensitivity will begin to increase after one to two days of operation. 4 Advanced PureAir TM Newport 9000 Owner’s Manual EXPLANATION OF INDICATORS Negative Ion Indicator During the process when negative ions are generated, the blue indicator on the Soft Touch Contr...