Votos - 4, Puntuación media: 4.5
(
)
)
|
Resumen del manual
These buttons are connected to the temperature display. • The temperature display is switched over from the display of the ACTUAL temperature (Temperature display is illuminated) to the display of the DESIRED temperature (Temperature display flashes) by pressing one of the two buttons, „+“ (WARMER) or „-“ (COLDER). • Each time one of the two buttons is pressed again the DESIRED temperature is adjusted by 1 °C. • If neither button is pressed, the temperature display automatically switches back after a short period (approx. 5 sec.) to the display of the ACTUAL temperature. DESIRED temperature means: The temperature that has been selected for inside the fridge or the freezer compartment. The DESIRED temperature is indicated by flashing numbers. ACTUAL temperature means: The temperature display indicates the current temperature inside the fridge or the freezer compartment. The ACTUAL temperature is indicated with illuminated numbers. Temperature Displays The temperature displays shows several types of information. • During normal operation, the temperature currently present in the fridge or the freezer compartment (ACTUAL temperature) is displayed. • When the temperature is being adjusted a flashing display indicates the fridge or the freezer compartment temperature currently set (DESIRED temperature). 818 17 59-00/5 Prior to Initial Start-Up 1 Before connecting the appliance to the mains and putting it into operation for the first time, leave the appliance to stand for 30 minutes if was transported upright. After transport on its side, the appliance must be left to stand for 4 hours before putting it into operation. This is necessary to allow the oil to flow back into the compressor. Otherwise the compressor may be damaged. 0 1. Please clean the appliance interior and all accessories prior to initial start-up (see section: "Maintenance and Cleaning"). 2. Remove the cold accumulation block from the freezer tray. 3. Place the cold accumulation block into a compartment or drawer only after the optimal storage temperature of -18 °C has been reached, and allow to freeze. 4. After 24 hours place the cold accumulation block at the front of the upper drawer. 5. Re-freeze the thawed cold accumulation block in the same fashion, e.g. after cleaning the appliance. 818 17 59-00/5 Initial Start-Up Refrigerator and freezer compartments can be operated and controlled independently of one another. 0 1. Insert plug into mains socket. Refrigerator Start-Up 0 1. Press refrigerator ON/OFF button. The green power indicator for the fridge compartment lights up. Set the refrigerator to the desired temperature (see section: "Temperature Adjustment"). 3 Goods to be refrigerated can be loaded immediately after switching on, because the storage temperature in the refrigerator is quickly reached. Freezer Compartment Start-Up 0 1. Press freezer compartment ON/OFF button. The green power indicator for the freezer compartment lights up. A warning tone sounds and the flashing red warning light indicates that the required storage temperature has not yet been reached. 2. Press the WARNING OFF button to switch off the warning tone. 3. Set temperature to -18 °C or colder (see section: "Temperature Adjustment"). 4. Do not load freezer with goods until a temperature of -18 °C has been reached, or until the red warning display has gone out. 818 17 59-00/5 Temperature Adjustment With the individual temperature setting buttons the desired temperatures in the refrigerator and in the freezer compartment can be adjusted independently of one another. 0 1. Press either the „+“ (WARMER) or „-“ (COLDER) button. The temperature display switches over and the DESIRED temperature currently set flashes on the temperature display. 2. To adjust to a warmer temperature, press the „+“ (WARMER) button. To adjust to a colder temperature, press the „-“ (COLDER) button. The changed setting is immediately displayed on the temperature display. The temperature is adjusted by 1 °C with each press of a button. Note: From a food science point of view, +5 °C for the refrigerator compartment and -18 °C for the freezer compartment should be considered cold enough as a storage temperature. 3 Once the required temperature has been set, after a short period (approx. 5 sec.) the temperature display will change and again indicate the current ACTUAL temperature inside the fridge- or freezer compartment. The display changes from flashing to continuous illumination. Important! Please check red warning display and temperature display regularly to assure maintenance of the storage temperature. COOLMATIC/FROSTMATIC COOLMATIC The COOLMATIC function is suited for quick cooling of large quantities of goods in the refrigerator, e.g. drinks and salads for a party or wedding. 0 1. The COOLMATIC function is switched on by pressing the COOLMATIC button. The yellow light illuminates. The COOLMATIC function now provides for intensive cooling. A DESIRED temperature of +2 °C is automatically selected. ...
Otros modelos de este manual:Refrigeradores - SANTO 3150-7 KG (362.17 kb)
Refrigeradores - SANTO 3150-7 KG (362.17 kb)
Refrigeradores - SANTO 3150-7 KG (362.17 kb)
Refrigeradores - SANTO 3150-7 KG (362.17 kb)