Votos - 0, Puntuación media: 0 ( )

Fabricar: Bosch Tamaño del archivo: 6.68 mb Nombre del archivo: Idioma del manual:

Otros manuales para este modelo:

Refrigeradores - FI18NP31/04 (6.69 mb)

Refrigeradores - FI18NP31/04 (6.72 mb)

2. Press ice maker button . The symbol ICE is lit on the display panel. Switching off Note Before switching off the ice maker, it is most important that you switch the water supply to the appliance off for a few hours. Press ice maker button. Ice and water dispenser (not all models) The following can be dispensed as required: ¦ cooled water, ¦ crushed ice, ¦ ice cubes. a=Warning Never reach into the ice cube dispenser opening! Risk of injury! a=Caution Do not place bottles or food in the cube container in order to cool them quickly. The ice maker may block and be damaged. Using the ice and water dispenser The ice and water dispenser only works when the appliance is connected to the water mains. When the appliance has been switched on, it takes approx. 24 hours until the first batch of ice cubes are ready. When the appliance has been connected, there are still air bubbles in the lines. Run off drinking water and pour away until water can be dispensed without bubbles. Pour away the first 5 glasses. When using the ice maker for the first time, do not use the first 30-40 ice cubes for reasons of hygiene. Operating the ice maker When the freezer compartment has reached its freezing temperature, water flows into the ice maker and freezes into ice cubes. When the ice cubes are ready, they are automatically discharged into the ice cube container. Occasionally the sides of the ice cubes stick together. When they are conveyed to the outlet opening, they usually break away from each other. When the ice cube container is full, ice making switches off automatically. The ice maker can make approx. 100 ice cubes within 24 hours. Note To prevent ice cubes from sticking together, a rotating metal screw (agitation function) can be switched on for 2 sec. (see chapter Getting to know your appliance, Ice and water dispenser controls). Observing drinking water quality All materials used in the drinks dispenser are odourless and tasteless. If the water has an aftertaste, this may be caused by: ¦ Mineral and chlorine content of the drinking water. ¦ Material of the domestic water line and connection line. ¦ Freshness of the drinking water. If water has not been dispensed for a long time, the water may have a “stale” taste. In this case fill approx. 15 glasses of water and throw away. We recommend that you regularly dispense a little fresh water from the water maker and that you do not switch off the appliance. This will ensure that the best water quality is retained. Taste and odour of the water may be improved by installing the enclosed water filter in the water supply. The enclosed water filter will filter only particles out of the supply water, not bacteria or microbes. en Dispensing ice/water ¦ Select the ice and water dispenser button (water, crushed ice or ice cubes). ¦ Keep pressing the button until the required quantity is in the glass. Dispensing water Note The water from the water dispenser is cooled to a palatable temperature. If you would like the water cold...

Descargar ahora

Introduzca dos números de la imagen: