Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Electrical connection The socket must be near the appliance and also freely accessible following installation of the appliance. The appliance complies with the protection class I. Connect the appliance to 220- 240 V/50 Hz alternating current via a correctly installed socket with protective conductor. The socket must be fused with a 10 to 16 A fuse. For appliances operated in non- European countries, check whether the stated voltage and current type match the values of your mains supply. This information can be found on the rating plate. Fig. 0 a= Warning Never connect the appliance to electronic energy saver plugs. Our appliances can be used with mains and sine-controlled inverters. Mains- controlled inverters are used for photovoltaic systems which are connected directly to the national grid. Sine-controlled inverters must be used for isolated applications ( e.g. on ships or in mountain lodges) which are not connected directly to the national grid. Getting to know your appliance Please fold out the illustrated last page. These operating instructions refer to several models. The features of the models may vary. The diagrams may differ. Fig. 1 * Not all models. A Freezer section B Refrigerator compartment 1- 5 Controls 6 Light 7 Glass shelf in the refrigerator compartment 8* Extendable glass shelf 9 Vegetable container with humidity control 10 Vegetable container 11 Shelf for tubes and small tins 12 Butter and cheese compartment 13* Vario door shelf 14 Shelf for large bottles en Controls Fig. 2 1 On/Off button Serves to switch the whole appliance on and off. 2 “super” button Switches Super function on and off ( see chapter “ Super function” ) . It is lit when the Super function is switched on. 3 Temperature selection button Press this button to set the temperature. 4 Temperature display The numbers correspond to the set refrigerator compartment temperatures in °C. 5 Alarm button Used to switch off the warning signal, see chapter “ Alarm function”. Switching on the appliance Fig. 2 Switch on the appliance with the On/Off button 1. The appliance begins to cool. Light is switched on when the door is open. We recommend a factory setting of + 4 ° C in the refrigerator compartment. Do not store perishable food warmer than +4 °C. Operating tips ¦ After the appliance has been switched on, it may take several hours until the set temperature has been reached. Do not put any food in the appliance beforehand. ¦ While the refrigeration unit is running, water droplets or hoarfrost may form at the rear panel of the refrigerator. This is due to functional reasons. It is not necessary to scrape off the frost or wipe off the water droplets. The rear panel defrosts automatically. The condensation collects in the drainage channel and is carried to the refrigeration unit where it evaporates. Fig. 3 ¦ The front sides of the housing are partly heated slightly. This prevents condensation in the area of the door seal. en Setting the temperature Fig. 2 Refrigerator compartment The temperature can be set from +2 °C to + 8 °C. Keep pressing temperature setting button 3 until the required refrigerator compartment temperature is set. The value last selected is saved. The set temperature is indicated on temperature display 4. Freezer compartment The temperature in the freezer compartment depends on the temperature in the refrigerator compartment. Alarm function Door alarm The door alarm ( continuous sound) switches on if the appliance door is open for longer than two minutes. Close the door to switch off the warning signal. Switching off the alarm Fig. 2 Press the alarm button 5 to switch off the warning signal. Super function When Super function is switched on, the freezer compartment and refrigerator compartment will become colder. Notes ¦ There may be increased operating noises. ¦ The Super function is not required to freeze small quantities of food. Using Super function ¦ Switch on “ Super” function before placing fresh products in the compartment. ¦ If food is frozen quickly, vitamins, nutritional values, appearance and taste are retained. ¦ Cooling drinks quickly. ¦ Storing large quantities of food in the refrigerator compartment. Switching on and off Fig. 2 Press “ super” button 2. The button is lit when the Super function is switched on. The Super function automatically switches off after approx. 1. days and the temperature set previously is restored. Usable capacity Information on the usable capacity can be found inside your appliance on the rating plate. Fig. 0 Refrigerator compartment The refrigerator compartment is the ideal storage location for meat, sausage, fish, dairy products, eggs, ready meals and pastries. Storing food ¦ Store fresh, undamaged food. The quality and freshness will then be retained for longer. ¦ In the case of ready- made products and bottled goods, observe the best- before date or use- by date specified by the manufacturer. ¦ To retain aroma, colour and freshness, pack or cover food well before placing i...
Otros modelos de este manual:Refrigeradores - KI2723F30/01 (1.65 mb)
Refrigeradores - KI2823D30/01 (1.65 mb)
Refrigeradores - KI2823F30/01 (1.65 mb)
Refrigeradores - KI2723D40/01 (1.65 mb)