Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
The climate class indicates within which ambient temperatures the appliance can be operated. Climate Permitted ambient temperature class SN +10 °C to 32 °C N +16 °C to 32 °C ST +16 °C to 38 °C T +16 °C to 43 °C Note The appliance is fully functional within the room temperature limits of the indicated climatic class. If an appliance of climatic class SN is operated at colder room temperatures, the appliance will not be damaged up to a temperature of +5 °C. Ventilation Conduction of the heated air must not be obstructed. Otherwise, the refrigeration unit must work harder. This increases power consumption. Therefore: Never cover or block the ventilation opening! Connecting the appliance Have a technician install and connect the appliance according to the enclosed installation instructions. Do not remove the transportation protection devices from the shelves and storage compartments until the appliance has been installed. In addition to the statutory national regulations, observe the connection conditions of the local power supply companies. After installing the appliance, wait at least 1 hour until the appliance starts up. During transportation the oil in the compressor may have flowed into the refrigeration system. Before switching on the appliance for the first time, clean the interior of the appliance (see chapter “Cleaning the appliance”). Electrical connection The socket must be near the appliance and also freely accessible following installation of the appliance. The appliance complies with the protection class I. Connect the appliance to 220-240 V/50 Hz alternating current via a correctly installed socket with protective conductor. The socket must be fused with a 10 to 16 A fuse. For appliances operated in non-European countries, check whether the stated voltage and current type on the rating plate match the values of your mains supply. These specifications can be found on the rating plate (see chapter “Customer service”). a Warning Never connect the appliance to electronic energy saver plugs. Our appliances can be used with mains and sine- controlled inverters. Mains-controlled inverters are used for photovoltaic systems which are connected directly to the national grid. Sine- controlled inverters must be used for isolated applications (e.g. on ships or in mountain lodges) which are not connected directly to the national grid. Get ti ng to k n ow yo ur a ppl i an c e These operating instructions refer to several models. The diagrams may differ. * Not all models. A Upper climatic zone B Lower climatic zone 1 Light switch 2 Controls 3 Light (LED) with switches for presentation lights 4 Shelf for wine bottles 5 Partition 6 Light (presentation light) 7 * Presentation attachment 8 Glass door 9 * Extendable shelf 10 Ventilation Controls A On/Off button y B Serves to switch the whole appliance on and off. Alarm button ± Used to switch off the warning signal, (see chapter Alarm function). C Display panel The temperatures in both climatic zones of the refrigerator compartment are shown in the display panel. Activated special functions are shown via “symbol”. D The menus and setting options which are available are represented on the display panel in the setup mode, see chapter “Special functions”. Selection buttons . . The temperature setting is activated using the selection buttons (see chapter Setting the temperature). For selecting a menu in the setup mode (see chapter Special functions). E Setting buttons +/– The temperature can be changed using the setting buttons (see chapter “Setting the temperature”). More settings can be selected in the setup mode, (see chapter “Special functions”). F “setup” button . This button starts and ends the setup mode. If the setup mode is ended using the setup button, the changes which have been made are stored. G Holiday button ¶ Is used to switch holiday mode on and off, (see chapter Special functions, section Holiday mode). Note A sound can be heard every time a button is actuated if this function is activated in the sound menu during the setup mode. Symbols in the display field Display for the upper climatic zone. Display for the lower climatic zone “Humidity” function is activated (see chapter “Special functions”, section “Humidity function”). Holiday mode is activated, see chapter Special functions. For the setting options in the set up mode, see chapter Special functions. A warning message is displayed, see chapter Alarm function. Switching the appliance on Switch on the appliance with the On/Off button y. The appliance begins to cool. Light is switched on when the door is open. Operating tip After the appliance has been switched on, it may take several hours until the set temperature has been reached. Set the language The display languages can be changed according to the table in the chapter “Special functions”, “Setup mode”. In order to change the display language: 1. Press setup button .. 2. Press the . or . setting button, until the set langua...
Otros modelos de este manual:Refrigeradores - RW414361/02 (1.89 mb)
Refrigeradores - RW464301/01 (1.89 mb)
Refrigeradores - RW464361/01 (1.89 mb)
Refrigeradores - RW464361AU/01 (1.89 mb)