Votos - , Puntuación media:
(
)
)
Fabricar: Nikon
Tamaño del archivo: 1.68 mb
Nombre del archivo:
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
This section describes a simple network consisting solely of a wireless LAN access point (bridge) connected to an ftp server via a LAN cable or wireless, with no connections to other networks or devices. Follow the steps below to use the WT-4 in this type of network. 1: Get Ready 2: Installing IIS 3: Configure the Wireless LAN Access Point 4: Assign the ftp Server an IP Address 5: Configure the ftp Server for Wireless Access 6: Using Windows Firewall 7: Create an ftp Server 8: Copy the Network Profile to the Camera 9: Connect to the ftp Server To the top of the page Equipment Ready the following: • A WT-4 wireless transmitter file:///C:/Users/harpley/Desktop/Windows7_html/01_7FI_En.html 02/12/2011 Configuring the WT-4 for ftp (Infrastructure Mode) Page 2 of 25 • A fully-charged EN-EL3e battery for the WT-4 • A digital SLR camera that supports the WT-4 (the illustrations show a Nikon D3) • A fully-charged battery for the camera • A computer with Windows 7 Ultimate/Professional/Home Premium/Home Basic/Enterprise edition and a compatible version of the WT-4 Setup Utility installed • A wireless LAN access point • A LAN cable •A memory card • A USB cable • Manuals for the above equipment Network Settings Note the IP addresses, encryption, and other settings that will be used in the wireless LAN. The following are intended as examples only. • IP address for the WT-4: 192.168.1.4 • IP address for the ftp server: 192.168.1.3 • IP address of the wireless LAN access point: 192.168.1.2 • Subnet mask: 255.255.255.0 • FTP server port: 21 • Network name (SSID): WT-4 • Communication mode: Infrastructure • Authentication: WPA-PSK • Encryption: TKIP • Encryption key: abcde123 To the top of the page The WT-4 canupload images to ftp servers created using the Internet Information Services (IIS) ftp serverfeature supplied with Windows 7. 2–1 Go to the Programs > Programs and Features > Turn Windows features on or off control panel. file:///C:/Users/harpley/Desktop/Windows7_html/01_7FI_En.html 02/12/2011 Configuring the WT-4 for ftp (Infrastructure Mode) Page 3 of 25 2–2 Expand the Internet Information Services category. Expand FTP Server and Web Management Tools and select FTP Service, FTP Extensibility, and IIS Management Console. Click OK; if prompted, restart the computer. 2–3 Restart the computer. IIS installation is complete. To the top of the page Configure the wireless LAN access point as described below. For more information, see the documentation provided by the manufacturer. • Network name (SSID): Enter the network identifier (network name or SSID), which may be up to 36 characters long. The network in this example uses the identifier WT4. • Wireless mode: Choose 802.11g or 802.11b. • Channel: Automatic. file:///C:/Users/harpley/Desktop/Windows7_html/01_7FI_En.html 02/12/2011 Configuring the WT-4 for ftp (Infrastructure Mode) Page 4 of 25 • Wireless security ¦ Authentication: Choose from open system, shared key, WPA-PSK, or WPA2-PSK. The network in this example uses WPA-PSK. ¦ Encryption: If you selected open system or shared key authentication, choose 64-or 128-bit WEP. If you selected WPA-PSK or WPA2-PSK authentication, choose TKIP or AES. The network in this example uses TKIP. ¦ Encryption key: If you selected 64-bit WEP encryption, enter a 5-character ASCII or 10 -digit hexadecimal key. If you selected 128-bit WEP encryption, enter a 13-character ASCII or 26-digit hexadecimal key. If you selected TKIP or AES, enter an ASCII key of from 8 to 63 characters or a 64-digit hexadecimal key. The network in this example uses abcde123. ¦ ANY connection: Enable this option to make the network SSID public. This makes it easier to connect to the network, but also makes the network less secure. This option may not be available on some access points. In this example, we will enable ANY connection. • IP address: Turn any “obtain automatically” options off and enter the IP address manually. Be sure that the address is different from the addresses used for the ftp server and WT-4. The addresses for the access point, ftp server, and WT-4 must however belong to the same class. In this example, we will use the following address for the access point, while the ftp server and WT-4 are assigned 192.168.1.3 and 192.168.1.4, respectively: • IP address: 192.168.1.2 • Subnet mask: 255.255.255.0 • Default gateway: ---.---.---.--• DNS server: ---.---.---.--• MAC address: If the network uses MAC address filtering, the filter must be supplied with the MAC address of the WT-4. After attaching the WT-4 to the camera, turn the WT-4 on, select Wireless transmitter > Device info > MAC address from the camera setup menu, and note the MAC address. To the top of the page Choose an address for the ftp server. The following IP address is intended as an example only. • IP address: 192.168.1.3 • Subnet mask: 255.255.255.0 • FTP server port: 21 4–1 Open the Network and Internet > Network and Sharing Center control panel. file:///C:/Users/harpley/Desktop/Win...