THEY WILL PROVIDE MORE POWER THAN ALKALINE AA BATTERIES 2- Unscrew bottom and load one “AA” battery (+ side first) into the iTurbo. 3- Screw the bottom until the blue light turns on to test the battery. 4- Unscrew until the light shuts off (OFF position) 5- When not using the iTurbo leave the unit in the off position to preserve battery life. 6- Connect the adapter for your iPod to the top of the iTurbo. 7- Tighten bottom all the way so the blue light illuminates (ON position) 8- Connect

This is normal and indicates the iTurbo is working at maximum efficiency. • If your iPod is not charging, simply re-set your iPod by following Apple’s instruction LIFETIME GUARANTEE: In the unlikely event that your iTurbo damages your iPod battery at anytime, we will replace your iPod battery free of charge. This lifetime guarantee is activated when you mail in the attached registration card. To have us replace your damaged iPod battery, simply send us: (1) your iPod, (2) the iTurbo that cause

THEY WILL PROVIDE MORE POWER THAN ALKALINE AA BATTERIES. 2- Unscrew bottom and load one “AA” battery (+ side first) into the TURBO CHARGE. 3- Screw the bottom until the blue light turns on to test the battery. 4- Unscrew until the light shuts off (OFF position) 5- When not using the Turbo Charge leave the unit in the off position to preserve battery life. 6- Connect the appropriate adapter for your cell phone to the top of the TURBO CHARGE. 7- Tighten bottom all the way so the blue light i

Do NOT force the adapter. Doing so may damage your phone. 9- Blue light will illuminate to full brightness indicating cell phone is charging. You can now use your cell phone. 10- When blue light is extinguished or becomes very faint, unplug TURBO CHARGE and replace “AA” battery before charging again. FREE ADAPTERS FOR OTHER PHONE MODELS/BRANDS: If no included adapter fits your cell phone, please refer to our web site, for a free additional adapter. (Shipping & Handling may apply. Adapters a

THEY WILL PROVIDE MORE POWER THAN ALKALINE AA BATTERIES. 2- Slide off battery cover and load two “AA” batteries. Follow the battery polarity as indicated inside the unit. The 2 batteries should be facing opposite directions. 3- Replace the battery cover. 4- Slide the switch down to the ON position. The top will light up blue. You will also see 3 blue lights on the front of the unit (the Power Gauge) indicating the power remaining in the ‘AA’ batteries. (3 lights - FULL, 2 lights HALF, 1 light