Votos - 4, Puntuación media: 3.5
(
)
)
|
Resumen del manual
You should keep all the disassembled items safely, such as the bracket, screws, cables, etc., in order to install the SSD. If an existing SATA HDD is being replaced with an SSD, you can use the existing SATA interface cable and SATA power cable. If the SSD is being newly installed in your desktop PC, then you should prepare any necessary items such as a SATA interface cable, SATA power cable, 3.5 inch bracket, screws, etc. 3. A SATA interface cable that is longer than 1 metre may result in hardware detection failures or operational failures. Note: SATA cables are compatible with all SATA interface types (SATA 1.5 Gbps, 3 Gbps and 6 Gbps). 4. Please check the terms and conditions of your PC manufacturer's warranty since it may prohibit the user from disassembling the PC and self-installing the SSD. 5. This SSD 470 Series is designed, manufactured and certified for general desktop PC and notebook PC environments, so it is not intended or allowed to be used in enterprise server systems, workstations, and storage systems. If you need SSDs for applications or environments other than general PCs, please purchase a different product made specifically for such purposes. Samsung Solid State Drive 4 Quick User Manual 3. Hardware Installation Guide This section briefly describes the installation procedures of the SSD. For more information, please refer to the user manual of your PC. Notebook PC 1. Turn OFF the notebook PC power. Disconnect the power plug and remove the battery from the PC. 2. Remove the HDD cover on the back of the notebook PC, and then carefully remove the HDD from the bay without damaging the HDD connector. 3. If the HDD is fixed with a bracket, then disassemble the HDD from the bracket. Be careful when you disconnect the connector or cables from the HDD. 4. Precisely assemble the SSD with the bracket, and then connect the cable. 5. Insert the SSD into the bay carefully so it fits properly, and then close the HDD cover. б. Re-insert the battery. Samsung Solid State Drive 5 Quick User Manual Desktop PC 1. Turn OFF the desktop PC power and disconnect the power cable. 2. Remove the desktop PC cover. 3. If the SSD is added in addition to the existing storage device, mount it in a 2.5" HDD bay. Next, connect the SATA cable and power cable to the SSD. If your PC is only equipped with 3.5" HDD bays, then assemble the SSD in a 2.5" to 3.5" bracket first and then mount the bracket in an empty HDD bay. 4. If you are replacing an existing HDD with the SSD, disconnect all cables connected to the HDD and then remove the HDD from the bay. Assemble the SSD in a 2.5" to 3.5" bracket first and then mount the bracket in an empty HDD bay. Next, connect the SATA cable and power cable properly. Note: You may need proprietary chassis screws, rails or brackets to use in the drive bay. Note: Desktop PCs have multiple SATA ports based on the PC chipset and motherboard model. It is recommended that the SSD be connected to the lowest numbered SATA port. Most desktop PCs have 4~6 SATA ports and each is numbered on the mot...
Otros modelos de este manual:Unidades de disco duro - MZ-5PA064B (3.61 mb)
Unidades de disco duro - MZ-5PA128B (3.61 mb)
Unidades de disco duro - MZ-5PA128C (3.61 mb)
Unidades de disco duro - MZ-5PA256B (3.61 mb)