Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
The operating system will now recognize the USB Flash Drive and assign two available drive letters, one to the USB Flash Drive and one to the card reader. You can only access one drive, if no microSD card is inserted. Now you can use the device like a mass storage device (copy data, delete, etc.). Removing USB Flash Drive With some operating systems it may be necessary to sign off the device. The installed USB Flash Drive is displayed in the taskbar. Right click with the mouse “Unplug or Eject Hardware” (1) and choose the appropriate entry. Safely remove USB mass storage device – drive (G:) • The instruction for device removal will follow: Inserting a microSD Card Insert the microSD card until it locks. A picture on the USB Flash Drive shows how to insert the microSD card properly without running the risk of damaging the card or the card reader. The card can be accessed as an additional drive on your computer. Removing a microSD Card In order to remove the microSD card you first have to dismount the USB Flash Drive. Disconnect the USB Flash Drive from the computer and press lightly on the back of the microSD card to remove it from the card reader. Hint Never remove a microSD card or the USB Flash Drive while programs are still accessing them. This could cause loss of data. Customer Service Errors and Possible Causes USB Flash Drive is not recognized: . Is the device connected correctly? . Check in the Windows® device manager, whether the USB units are correctly linked. If necessary re-install the USB controller. Data cannot be read / written: . Did you format the USB Flash Drive with another computer? Different formats (FAT/FAT32/HFS) may be incompatible. Save the data and reformat the USB Flash Drive with a compatible format. Additional Support If the suggestions in the above section have not solved your problem, please contact the service hotline and we will attempt to help you solve the problem. Before you contact the Helpline, however, please have the following information available: . How is your computer configured? . What additional peripherals do you use? . What messages, if any, appear on your screen? . What software were you using when the error occurred? . What steps have you already undertaken to solve the problem? . If you have been given a customer number previously, please quote this. Please note: If the USB Flash Drive does not operate normally due to an electrostatic discharge, faulty data exchange or other error, please carefully disconnect the USB Flash Drive and reconnect it. Copyright © 2011, All rights reserved. Microsoft®, MS-DOS®, and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries. The names of actual companies and products mentioned herein may be the trademarks of their respective owners. Information in this document is subject to change without not...