Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
We recommend that you ventilate the room regularly, in order to counteract the formation of the smell. Electromagnetic compatibility/Conformity This device fulfils the requirements of electromagnetic compatibility and electrical safety of the following: EN 55022 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement EN 55024 Information technology equipment - Immunity characteristics - Limits and methods of measurement EN 61000-3-2 Electromagnetic compatibility (EMC) - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase) EN 61000-3-3 Electromagnetic compatibility (EMC) - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection EN 60950 Safety of information technology equipment . Make sure that it is located at least one meter away from sources of high frequency and magnetic disturbance (TVs, speakers, mobile telephones, etc.) in order to avoid operational problems and data loss. 3 UK / NORTHERN IRELAND HELPLINE 0871 3761 020 (calls are charged at 7p per min from a standard landline, calls from mobiles could be higher REPUBLIC OF IRELAND HELPLINE 1-800-992 508 Power supply . Do not open the power adapter housing. When the housing is open there is a danger of severe electric shock. It contains no user-serviceable parts. . The power socket must be in the vicinity of the device and within reach of the power adapter cables. DO NOT stretch the power cables tightly to reach a power socket. . To disconnect your device from the power source remove the power cord from the power socket. Always hold the power supply unit firmly when taking it out. Never pull the lead power cable. . Only use the power supply unit (FSP P/N: FSP024-DEFB2). . Stop using the power supply unit if the housing or the feed line to the device is damaged. Replace it with a power supply unit of the same type. . Only use the power supply unit at earthed power points with AC 200-240V~, 50 Hz. . To avoid power consumption when the device is switched off either pull out the power plug when the device is not in use or connect the device to a master-/slave power bar. . If using an extension cord, make certain that it meets your local safety requirements. If in doubt, consult a qualified electrician. . To provide additional protection against electric shock, power surges, lightning strikes, or other electrical damage to your device, we recommend the use of a surge protector. 4 4 UK / NORTHERN IRELAND HELPLINE 0871 37 61 020 (calls are charged at 7p per min from a standard landline, calls from mobiles could be higher REPUBLIC OF IRELAND HELPLINE 1-800-992508 FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to pr...