Votos - 0, Puntuación media: 0 ( )

Fabricar: Philips Tamaño del archivo: 910.41 kb Nombre del archivo: Idioma del manual:

It also helps to protect your gums. When you exer t too much pressure while brushing, the brush head will automatically flex back. Because of this clear signal, you will quickly adopt the right brushing force. Clinical tests have shown that, thanks to this system, brushing with the Philips Sensiflex results in a better and safer brushing technique. general description (Fig. 1) A Brush attachment B Handle C Holder for 2 brush attachments D Storage container E Charger F Holder for 2 brush attachments important Read these instructions for use carefully before using the appliance and save them for future reference. The cord of the charging unit cannot be replaced. If the cord is , damaged, the charging unit must be discarded. Make sure the socket is live when you recharge the toothbrush. , The electricity supply to sockets in mirror cabinets over washbasins or shaver sockets in bathrooms may be cut off when the light is turned off. Preparing for use mounting the appliance to the wall Mount the charging unit to the wall, using screws ( .0x 0mm) and wall plugs (S5) (not included). (Fig. ) charging the appliance Charge the appliance for at least 6 hours before using it for the first time. EnglisH Make sure the appliance is switched off when you start charging it. , (Fig. ) You can put the toothbrush in the stand and let it charge , continuously. However, when you first star t using the appliance, it is recommended that you use it until the batter y is empty. To do so, use the appliance in the normal way without recharging it between the brushing sessions. Recharge the appliance when the motor almost stops running. Repeat this procedure 3 times in a row. To extend the lifetime of the batter y, repeat this procedure ever y 6 months. Types HX 585, HX 5 8 and HX 5 6 only: when the battery is , being charged, the green pilot light is on. (Fig. ) You can put the toothbrush in the stand and let it charge , continuously. using the appliance Mount the brush attachment onto the toothbrush by inserting it into the bayonet catch and turning it clockwise a quarter of a turn. (Fig. 5) This will make it impossible for the brush attachment to become detached due to vibration. Put toothpaste on the brush head. Place the brush head in your mouth. (Fig. 6) Switch the appliance on by pressing the button and start brushing your teeth. (Fig. ) For the best brushing method, minimal brushing time and brushing , functions of the appliance, see the ‘Brushing tips’ section below. Brushing tips Brushing Place the brush head against the tooth in such a way that it covers the surface of the tooth as well as the gum line. (Fig. 8) EnglisH Hold the brush head in this position for a few seconds and then move on to the next tooth. (Fig. 9) The round brush head removes plaque from the teeth and beneath the gum line. The individually moving Active Tip cleans between the teeth. Guide the brush head carefully along the teeth and molars. (Fig. 0) Make sure you clean all surfaces of the teeth...

Descargar ahora

Introduzca dos números de la imagen: